3M™ Wind Protection Tape 2.1 W8751, colorless, 305 mm x 22 m x 0,36 mm
Ready for shipment 14 Workdays
- Item no.: WS00417521
W8751 colorless replaces W8607 and W8750, W8781 replaces W8780.
Same Durable WPT 2.0 Blade Protection
o Tested 50 hr. RET at 140m/s no damage observed
o 1500% elongation at break
o 31 MPa tensile strength
o 9.1 N/cm peel adhesion (epoxy primer)
• Improved UV & Degradation Resistance
o Additive package reformulated for improved resistance to environmental degradation vs. 3M™ WPT 1.0 & 2.0 2
• Popular roll sizes available
o33m length: 102mm, 152mm, 254mm, & 305mm widths
o22m length: 305mm width
The application process is nearly unchanged WPT 2.1 applies the same as WPT 2.0. No breakthrough or onset of erosion was noted on any of the WPT 2.1 test samples
3M recommends the use of W2600 Edge Sealer and adhesion promotor for improved resistance to delamination.
Video: How to install 3M™ Wind Blade Protection Tape
Video: Making it easier to repair leading edge of wind turbine blades: An example from 3M and Bladefence
