Stand-alone Ethernet to CANopen Master Interface, designed for the WP4x00 concept ? Up to 1Mbit/s... more
Product information "Mita-Teknik WP-Line 511 MK ll CANopen Interface"
Stand-alone Ethernet to CANopen Master Interface, designed for the WP4x00 concept ? Up to 1Mbit/s CANopen ? 2 x Ethernet 100 Base-FX (SC Optic Backbone with redundant option) ? 2 x RJ45 Ethernet 10/100 for display and service ? Flexible serial COM-Port (RS232/RS422/RS485) ? Supports removable LED matrix display ? +24 VDC supply voltage ? Intelligent thermal control The WP4x00 MK ll Control Concept The WP-Line 511 MK ll CANopen interface module is part of the WP4x00 MK ll Control Concept which has been specially designed to control large wind turbines - on- and offshore. The WP4x00 MK ll Control Concept ensures optimal operation, high security and advanced data collection. The concept typical consists of a power supply/backbone module, a WP4x00 MK ll controller, a grid measurement module as well as an analog/digital I/O module dependent on the specific configuration task. The WP4x00 MK ll Control Concept makes it possible to have redundant solutions. The concept is constructed as a plug-and-play system with automatic module detecting and error reporting. Advantages of the WP4x00 MK ll Control Concept: ? Corrosion robust construction ? Fast and easy DIN-rail mounting ? Simplified module status indication ? Service-friendly The WP-Line 511 MK ll High speed Ethernet to CANopen Master interface designed for stand alone operation and as a part of the WP4x00 MK ll Control Concept. Internal 10/100 Ethernet switch for routing and interfacing. Backbone Ethernet communication can be connected with optic fibre cables as double ring with one spare fibre cable for backup. This setup provides high communication safety, as this con-figuration allows operation despite of a defect optic fiber. The optic fibre cable type is 62.5/125?m or 50/125?m. Additional 2 x 10/100 Ethernet (RJ45) are on the module. Up to 1MBit/s CANopen Master communication to other CANopen based devices. Galvanic isolated CANbus interface. Internal condition monitoring, 7-segment display showing group number and 3-LED status indication facilitates fast servicing. Automatic firmware update is managed by the WP4x00 MK ll controller. The module can easily be programmed as a CANopen Master, interfacing WP4x00 MK ll controller to any CANopen device (frequency Converter, Pitch controller, etc.). Via generic CANopen application (in compliance with CiA301 and CiA DSP 302 specification standards) and user-friendly interface of Mita-Teknik ?CANopen Configuration Tool? all CANopen network parameters can be easily configured and adjusted to meet the preset requirements.
Related links to "Mita-Teknik WP-Line 511 MK ll CANopen Interface"
Last viewed wind turbine spare parts and repair material