To get more information about products, please log in or request the product via the button below | Register here...
Minimum purchase: 3 pc(s).
Low-solvent intermediate coating based on epoxy resin
Ready for shipment 8 Workdays
- Item no.: WS03600743
SikaCor® EG-1 is a 2-component, micaceous iron oxide intermediate coating based on epoxy resin.... more
Product information "SikaCor EG-1, DB702, 3 kg"
SikaCor® EG-1 is a 2-component, micaceous iron oxide intermediate coating based on epoxy resin. Low solvent content according to the guideline of the Paint Industry Association for corrosion protection and coating materials (VdL-RL 04).
APPLICATION
SikaCor® EG-1 is intended for use by professional applicators only. SikaCor® EG-1 is used as a mechanically resistant intermediate coating for atmospherically surfaces of steel, hot-dip galvanized steel, spray galvanized steel, spray galvanized steel, stainless steel or aluminum. SikaCor® EG-1 in combination with 2-component primer and top coats provides a mechanically resistant, water- and chemical-resistant coating system for long-lasting corrosion protection up to C5 high, according to DIN EN ISO 12944-2.
PRODUCT FEATURES/ ADVANTAGES
? Directly applicable on hot-dip and spray-galvanized steel as well as stainless steel and aluminum
? Coating thicknesses up to 120 µm per pass
? Very good corrosion protection properties
? Tough elastic and hard, but not brittle
? Largely insensitive to impact and shock
APPLICATION
SikaCor® EG-1 is intended for use by professional applicators only. SikaCor® EG-1 is used as a mechanically resistant intermediate coating for atmospherically surfaces of steel, hot-dip galvanized steel, spray galvanized steel, spray galvanized steel, stainless steel or aluminum. SikaCor® EG-1 in combination with 2-component primer and top coats provides a mechanically resistant, water- and chemical-resistant coating system for long-lasting corrosion protection up to C5 high, according to DIN EN ISO 12944-2.
PRODUCT FEATURES/ ADVANTAGES
? Directly applicable on hot-dip and spray-galvanized steel as well as stainless steel and aluminum
? Coating thicknesses up to 120 µm per pass
? Very good corrosion protection properties
? Tough elastic and hard, but not brittle
? Largely insensitive to impact and shock
Related links to "SikaCor EG-1, DB702, 3 kg"
Read, write and discuss reviews... more
Customer evaluation for "SikaCor EG-1, DB702, 3 kg"
Write an evaluation
Evaluations will be activated after verification.
On stock
On stock
On stock
Last viewed wind turbine spare parts and repair material