No results were found for the filter!
For more information about products, please log in or request the product via the button below | Register here...
Description: HEMPATHANE HS 55610 is a two-component glossy acrylic polyurethane topcoat, cured with aliphatic isocyanate, with good gloss and colour retention. Contains zinc phosphate. Recommended use: As a VOC-compliant, high-build finishing coat for protection of structural steel in severely corrosive environment. May be specified as a one coat "Direct To Metal" system in environments classified as C2 and C3.
Content 0.75 Liter
Minimum purchase: 1 pc(s).
In stock
Sika Aktivator-205 (Sika Cleaner-205), 250 ml can
Content 250 Milliliter
Minimum purchase: 1 pc(s).
In stock
SikaCor SW-1000 RepaCor, RAL 7035 light grey, 295 g cartridge incl. mixing nozzle
Content 295 Gramm
Minimum purchase: 1 pc(s).
In stock
SikaCor SW-1000 RepaCor, RAL 1023 yellow, 295 g cartridge incl. mixing nozzle
Content 295 Gramm
Minimum purchase: 1 pc(s).
In stock
Summer mixing nozzle for SikaCor SW-1000 RepaCor 295 g cartridge, (1 bag = 10 nozzles)
Content 10 Stück
Minimum purchase: 1 bag(s)
In stock
Description:_x000D_ HEMPADUR EM 35740 is a two-component, ultra high solids and very low VOC epoxy coating. It has good self priming properties and is suited for application even under humid conditions and on marginally prepared surfaces. Treated areas, e.g. ballast tanks, can quickly be re-immersed and put back in service. Time to ballast: 8 hours (20°C/68°F)._x000D_ _x000D_ Recommended use:_x000D_ For smaller difficult access areas where climate control and surface preparation is difficult. It is especially recommended for spots and small area onboard maintenance and repair in e.g. water ballast tank. HEMPADUR EM 35740 can be used on moist surfaces, under conditions of 100% relative humidity. It is mainly intended for brush application.
Content 2.5 Liter
Minimum purchase: 1 pc(s).
Description: HEMPATHANE TOPCOAT 55213 is a two-component, semi-flat/semi-gloss acrylic polyurethane coating with good gloss and colour retention. Recommended use: As a finishing coat for protection of stuctural steel in severely corrosive atmospheric environment, where light-fastness and gloss retention are required. Minimum temperature for curing is -10°C/14°F.
Content 0.75 Liter
Minimum purchase: 6 pc(s).
In stock
Description: HEMPEL'S ZINC PRIMER 16490 is a one-component, high molecular weight, quick drying, phenoxy coating with a high content of zinc. Recommended use: As a protective primer on steel in severely corrosive environment. For repair of GALVOSIL and other zinc rich coatings. For repair of galvanized steel. In compliance with SSPC-Paint 20, type 2, level 3.
Content 4 Liter
Minimum purchase: 1 pc(s).
In stock
Winter mixing nozzle for SikaCor SW-1000 RepaCor 295 g cartridge, (1 bag = 10 nozzles)
Content 10 Stück
Minimum purchase: 1 bag(s)
Sika Permacor 2330 WEA (AB) RAL 5018, 11,5KG. TURQUOISE BLUE
Content 11.5 Kilogramm
Minimum purchase: 1 pc(s).
Sika Permacor 2330 WEA (AB) RAL 5018, 28,75KG. TURQUOISE BLUE
Content 28.75 Kilogramm
Minimum purchase: 1 pc(s).

Hempel Curing Agent 97050 0,63 LI - FARBLOS 00000
Content 0.63 Liter
Minimum purchase: 3 pc(s).
Last viewed wind turbine spare parts and repair material