REQUEST PRICE
Please enter these characters in the following text field.

Fields with * are required
For commercial customers only

ALEXIT® BladeRep® Topcoat 12

ALEXIT® BladeRep Topcoat 12 is an externally resistant 2-component topcoat based on polyurethane for protection against erosion by rain and particles such as quartz and dust. In addition, ALEXIT® BladeRep Topcoat 12 has a high flexibility and very good chemical resistance.

Specially developed for blade coating where a superior product with chemical, UV and abrasion resistance as well as mechanical resistance is required. This two-component polyurethane topcoat meets or exceeds OEM standards and provides contractors with the ideal product for blade repair.

This high-quality 2-component topcoat on polyurethane basis was developed for the coating of rotor blades. Due to its mechanical and chemical resistances it meets the common requirements of the wind power industry.

Colours* RAL 2009 traffic orange, RAL 7035 light grey, RAL 9010 pure white
Mixing ratio** Punch through the lid, empty the entire hardener quantity into master lacquer, add 7% thinner (2 lids) and mix everything thoroughly
Pot life approx. 120 min at 23° C
Processing with foam roller
Yield approx. 2.5 m²/set at 150 µm TSD
2-layer application 100 to 125 µm per layer at 23° C
flash-off time between the layers: 60 min at 23° C
Drying time 3.5 h at 23° C
* other colours are available on request
** medium or large containers: for additional information on mixing ratio and yield, see technical data sheet


Product Packaging sizes
Basic product:
ALEXIT® BladeRep® Topcoat 12

To be used with:		 24 KG/ 12 KG/ 1 KG / 800 gr
Hardener:
ALEXIT® BladeRep® Hardener 12		 6 KG/ 3 KG / 220 gr
Thinner:
ALEXIT® BladeRep® Thinner 12 Medium
ALEXIT® BladeRep® Thinner 12 Fast		 10 KG / 1 KG


Safety Data Sheet ALEXIT® BladeRep® Topcoat 12

Safety Data Sheet ALEXIT® BladeRep® Hardener 12

Safety Data Sheet ALEXIT® BladeRep® Thinner 12 Medium
Safety Data Sheet ALEXIT® BladeRep® Thinner 12 Fast

ALEXIT® BladeRep Topcoat 12 is an externally resistant 2-component topcoat based on polyurethane for protection against erosion by rain and particles such as quartz and dust. In addition, ALEXIT®... read more »
Close window
ALEXIT® BladeRep® Topcoat 12

ALEXIT® BladeRep Topcoat 12 is an externally resistant 2-component topcoat based on polyurethane for protection against erosion by rain and particles such as quartz and dust. In addition, ALEXIT® BladeRep Topcoat 12 has a high flexibility and very good chemical resistance.

Specially developed for blade coating where a superior product with chemical, UV and abrasion resistance as well as mechanical resistance is required. This two-component polyurethane topcoat meets or exceeds OEM standards and provides contractors with the ideal product for blade repair.

This high-quality 2-component topcoat on polyurethane basis was developed for the coating of rotor blades. Due to its mechanical and chemical resistances it meets the common requirements of the wind power industry.

Colours* RAL 2009 traffic orange, RAL 7035 light grey, RAL 9010 pure white
Mixing ratio** Punch through the lid, empty the entire hardener quantity into master lacquer, add 7% thinner (2 lids) and mix everything thoroughly
Pot life approx. 120 min at 23° C
Processing with foam roller
Yield approx. 2.5 m²/set at 150 µm TSD
2-layer application 100 to 125 µm per layer at 23° C
flash-off time between the layers: 60 min at 23° C
Drying time 3.5 h at 23° C
* other colours are available on request
** medium or large containers: for additional information on mixing ratio and yield, see technical data sheet


Product Packaging sizes
Basic product:
ALEXIT® BladeRep® Topcoat 12

To be used with:		 24 KG/ 12 KG/ 1 KG / 800 gr
Hardener:
ALEXIT® BladeRep® Hardener 12		 6 KG/ 3 KG / 220 gr
Thinner:
ALEXIT® BladeRep® Thinner 12 Medium
ALEXIT® BladeRep® Thinner 12 Fast		 10 KG / 1 KG


Safety Data Sheet ALEXIT® BladeRep® Topcoat 12

Safety Data Sheet ALEXIT® BladeRep® Hardener 12

Safety Data Sheet ALEXIT® BladeRep® Thinner 12 Medium
Safety Data Sheet ALEXIT® BladeRep® Thinner 12 Fast

Filter
Close filters
 
  •  
1 From 3
No results were found for the filter!
For more information about products, please log in or request the product via the button below | Register here...
On stock
ALEXIT BladeRep Topcoat 12, RAL 7035 Light Grey, 1 kg Kit
ALEXIT BladeRep Topcoat 12, RAL 7035 Light...
2-component topcoat on a polyurethane basis to protect against erosion by rain and particles such as quartz and dust.
Content 1 Kilogramm
Details
On stock
ALEXIT BladeRep Topcoat 12, RAL 3020 Traffic Red, 1 kg Kit
ALEXIT BladeRep Topcoat 12, RAL 3020 Traffic...
Designed specifically for coating blades where a superior product with chemical, UV, abrasion and mechanical resistance is required. This two-component polyurethane topcoat meets or exceeds OEM standards and provides applicators with the ideal product for blade repairs.
Content 1 Kilogramm
Details
On stock
ALEXIT BladeRep Thinner 12 Fast, Transparent, 1 kg
ALEXIT BladeRep Thinner 12 Fast, Transparent, 1 kg
ALEXIT BladeRep Thinner 12 Fast, Transparent, 1 kg
Content 1 Kilogramm
Details
On stock
ALEXIT BladeRep Topcoat 12, RAL 9010 Pure White, 1 kg Kit
ALEXIT BladeRep Topcoat 12, RAL 9010 Pure...
Designed specifically for coating blades where a superior product with chemical, UV, abrasion and mechanical resistance is required. This two-component polyurethane topcoat meets or exceeds OEM standards and provides applicators with the ideal product for blade repairs.
Content 1 Kilogramm
Details
On stock
ALEXIT BladeRep Topcoat 12, RAL 9018 Papyrus White, 12 kg
ALEXIT BladeRep Topcoat 12, RAL 9018 Papyrus...
Designed specifically for coating blades where a superior product with chemical, UV, abrasion and mechanical resistance is required. This two-component polyurethane topcoat meets or exceeds OEM standards and provides applicators with the ideal product for blade repairs.
Content 12 Kilogramm
Details
ALEXIT BladeRep Hardener 12, Transparent, 220 gr
ALEXIT BladeRep Hardener 12, Transparent, 220 gr
ALEXIT BladeRep Hardener 12, Transparent, 220 gr
Content 220 Gramm
Details
ALEXIT BladeRep Hardener 12, Transparent, 3 kg
ALEXIT BladeRep Hardener 12, Transparent, 3 kg
ALEXIT BladeRep Hardener 12, Transparent, 3 kg
Content 3 Kilogramm
Details
ALEXIT BladeRep Thinner 12 Fast, Transparent, 10 kg
ALEXIT BladeRep Thinner 12 Fast, Transparent,...
ALEXIT BladeRep Thinner 12 Fast, Transparent, 10 kg
Content 10 Kilogramm
Details
ALEXIT BladeRep Thinner 12 Medium, Transparent, 1 kg
ALEXIT BladeRep Thinner 12 Medium, Transparent,...
ALEXIT BladeRep Thinner 12 Medium, Transparent, 1 kg
Content 1 Kilogramm
Details
ALEXIT BladeRep Thinner 12 Medium, Transparent, 10 kg
ALEXIT BladeRep Thinner 12 Medium, Transparent,...
ALEXIT BladeRep Thinner 12 Medium, Transparent, 10 kg
Content 10 Kilogramm
Details
ALEXIT BladeRep Topcoat 12, RAL 7035 Light Grey, 800 gr
ALEXIT BladeRep Topcoat 12, RAL 7035 Light...
ALEXIT® BladeRep® Topcoat 12 is designed specifically for coating blades where a superior product with chemical, UV, abrasion and mechanical resistance is required.  This twocomponent polyurethane topcoat meets or exceeds OEM standards and provides applicators with the ideal product for blade repairs.
Content 800 Gramm
Details
ALEXIT BladeRep Topcoat 12, RAL 9003 Signal White, 1 kg Kit
ALEXIT BladeRep Topcoat 12, RAL 9003 Signal...
ALEXIT® BladeRep Topcoat 12 is an externally resistant 2-component topcoat based on polyurethane for protection against erosion by rain and particles such as quartz and dust. In addition, ALEXIT® BladeRep Topcoat 12 has a high flexibility and very good chemical resistance.
Content 1 Kilogramm
Details
1 From 3
Last viewed wind turbine spare parts and repair material