REQUEST PRICE
Please enter these characters in the following text field.

Fields with * are required
For commercial customers only

AMPREG for wind turbines and wind turbine rotor blades

In this category you will find Ampreg epoxy laminating systems from Gurit for rotor blade and wind turbine repair.

Ampreg™ Series 3X replaces Gurit's legacy range of wet lamination systems for the manufacture of large composite structures in the marine, wind and construction industries. The comprehensive Series 3X portfolio consists of a single range of low toxicity and miscibility Ampreg 30®. Curing agents that can be used in conjunction with the following resins:

Ampreg 30 Low Viscosity Resin: replaces Ampreg 21.
Ampreg 31 Runoff Resin: replaces Ampreg 22
Ampreg 36 Premium Performance Resin: replaces Ampreg 26

Other additive products such as thixotropic pregel resin and high Tg hardener are also available.

  • Equal 100:26 resin to hardener mixing ratio throughout the hardener speed range.
  • Low initial mix viscosity & good cure progression from ambient only cures.
  • Robust resin matrix for good mechanical properties of the laminate
  • DNV-GL & Lloyds Register Certified formats available
  • Low toxicity hardener formulations
  • Improved hazard labeling
  • CMR & SVHC** Free
  • Reduced environmental hazards
  • Formulation with Gurit LRT (Light Reflective Technology) as standard

If you can't find the product you're looking for, send us your inquiry and we'll do the research for you.

With access to a wide range of products from various manufacturers, we can help you find the right spare part and accessories for your wind turbine.

In this category you will find Ampreg epoxy laminating systems from Gurit for rotor blade and wind turbine repair. Ampreg™ Series 3X replaces Gurit's legacy range of wet lamination systems... read more »
Close window
AMPREG for wind turbines and wind turbine rotor blades

In this category you will find Ampreg epoxy laminating systems from Gurit for rotor blade and wind turbine repair.

Ampreg™ Series 3X replaces Gurit's legacy range of wet lamination systems for the manufacture of large composite structures in the marine, wind and construction industries. The comprehensive Series 3X portfolio consists of a single range of low toxicity and miscibility Ampreg 30®. Curing agents that can be used in conjunction with the following resins:

Ampreg 30 Low Viscosity Resin: replaces Ampreg 21.
Ampreg 31 Runoff Resin: replaces Ampreg 22
Ampreg 36 Premium Performance Resin: replaces Ampreg 26

Other additive products such as thixotropic pregel resin and high Tg hardener are also available.

  • Equal 100:26 resin to hardener mixing ratio throughout the hardener speed range.
  • Low initial mix viscosity & good cure progression from ambient only cures.
  • Robust resin matrix for good mechanical properties of the laminate
  • DNV-GL & Lloyds Register Certified formats available
  • Low toxicity hardener formulations
  • Improved hazard labeling
  • CMR & SVHC** Free
  • Reduced environmental hazards
  • Formulation with Gurit LRT (Light Reflective Technology) as standard

If you can't find the product you're looking for, send us your inquiry and we'll do the research for you.

With access to a wide range of products from various manufacturers, we can help you find the right spare part and accessories for your wind turbine.

Close filters
 
  •  
  •  
1 From 2
No results were found for the filter!
For more information about products, please log in or request the product via the button below | Register here...
On stock
AMPREG 31 R/H FAST 4.66 KG kit
AMPREG 31 R/H FAST 4.66 KG kit
AMPREG 31 R/H FAST 4.66 KG Pack

EPOXY WET LAMINATING SYSTEM

  • Same 100:26 resin to hardener mix ratio by weight across range of hardener speeds
  • Viscosity optimised for good fabric wet-out and drainage resistance
  • Good cure progression from ambient only cures
  • Tough resin matrix giving good laminate mechanical properties
  • DNV-GL Certified formats available & Lloyds Register Certification in progress
  • Low Toxicity Hardener Formulations
    • Improved Hazard Labelling
    • CMR & SVHC** Free
    • Reduced Environmental Hazards
  • Formulated with Gurit LRT (Light Reflective Technology) as standard

 


Safety data sheet Ampreg 31 Resin_EN
Safety data sheet Ampreg 3X Fast Hardener_EN

Content 4.66 Kilogramm
On stock
AMPREG 30 R/H SLOW 1.26KG Pack
AMPREG 30 R/H SLOW 1.26KG Pack
AMPREG 30 R/H SLOW 1.26KG Pack. This product replaces: AMPREG 21 resin incl. slow hardener in 1.33 kg set
Content 1.26 Kilogramm
On stock
AMPREG 31 R/H STANDARD 4.66 KG kit
AMPREG 31 R/H STANDARD 4.66 KG kit

AMPREG 31 R/H STANDARD 4.66 KG kit, EPOXY WET LAMINATING SYSTEM (follow-up material for AMPREG 22 R/H STD 4.23KG PACK)

Content 4.66 Kilogramm
On stock
AMPREG 30 R/H FAST 1.26KG Pack
AMPREG 30 R/H FAST 1.26KG Pack
AMPREG 30 R/H FAST 1.26KG pack. This is the follow-up material for: AMPREG 21 Harz incl. fast hardener 1,33 kg set 
Content 1.26 Kilogramm
On stock
AMPREG 31 R/H FAST 1.26 KG Pack
AMPREG 31 R/H FAST 1.26 KG Pack
AMPREG 31 R/H FAST 1.26 KG Pack
Content 1.26 Kilogramm
On stock
AMPREG 30 R/H STANDARD 1.26KG kit
AMPREG 30 R/H STANDARD 1.26KG kit
AMPREG 30 R/H STANDARD 1.26KG kit. This is the follow-up material for: AMPREG 21 resin including standard hardener in 1.33 kg set
Content 1.26 Kilogramm
On stock
AMPREG 30 R/H FAST 4.66KG kit, epoxy resin + hardener
AMPREG 30 R/H FAST 4.66KG kit, epoxy resin +...
AMPREG 30 R/H FAST 4.66KG kit. This is the follow-up product for: Ampreg 21 resin including fast hardener in 3.6 kg set
Content 4.66 Kilogramm
On stock
AMPREG 31 R/H STANDARD 1.26 KG Pack
AMPREG 31 R/H STANDARD 1.26 KG Pack
AMPREG 31 R/H STANDARD 1.26 KG Pack
Content 1.26 Kilogramm
On stock
AMPREG 30 R/H SLOW 4.66KG kit
AMPREG 30 R/H SLOW 4.66KG kit
AMPREG 30 R/H SLOW 4.66KG kit
Content 4.66 Kilogramm
On stock
AMPREG 30 R/H STANDARD 4.66KG kit, epoxy resin + hardener
AMPREG 30 R/H STANDARD 4.66KG kit, epoxy resin...
AMPREG 30 R/H STANDARD 4.66KG kit. Epoxy wet lamination system with low viscosity. Follow-up material for AMPREG 21 HARD STD 3,6 KG hardener.
Content 4.66 Kilogramm
AMPREG 30 R/H EXTRA-SLOW 1.26KG Pack
AMPREG 30 R/H EXTRA-SLOW 1.26KG Pack
Ampreg™ 3X Series replaces Gurit`s legacy range of wet laminating systems for the manufacture of large composite structures in the marine, wind and construction industries.
Content 1.26 Kilogramm
AMPREG 30 R/H EXTRA-SLOW 4.66KG Pack
AMPREG 30 R/H EXTRA-SLOW 4.66KG Pack
AMPREG 30 R/H EXTRA-SLOW 4.66KG Pack
Content 4.66 Kilogramm
1 From 2
Last viewed wind turbine spare parts and repair material