REQUEST PRICE
Please enter these characters in the following text field.

Fields with * are required
For commercial customers only

Repair products for wind turbine towers

In this category you will find repair products for wind turbine towers.

If you cannot find the products you are looking for, please send us your inquiry and we will research them for you.

With access to a wide range of products from various manufacturers, we can help you find the right spare part and accessories for your wind turbine.
In this category you will find repair products for wind turbine towers . If you cannot find the products you are looking for, please send us your inquiry and we will research them for you. With... read more »
Close window
Repair products for wind turbine towers
In this category you will find repair products for wind turbine towers.

If you cannot find the products you are looking for, please send us your inquiry and we will research them for you.

With access to a wide range of products from various manufacturers, we can help you find the right spare part and accessories for your wind turbine.
Close filters
 
  •  
2 From 6
No results were found for the filter!
For more information about products, please log in or request the product via the button below | Register here...
On stock
Hempadur 15570 (base 15579 + curing agent 95570), Hempel 12430 Reddish grey, 5 ltr.
Hempadur 15570 (base 15579 + curing agent...
Hempadur 15570 (base 15579 + curing agent 95570), Hempel 12430 Reddish grey, 5 ltr.
Content 5 Liter
On stock
Hempathane Topcoat 55210 (Basis 55219 + Härter 95370), Hempel 11150=RAL7035, 5 Ltr.
Hempathane Topcoat 55210 (Basis 55219 + Härter...
Hempadur 15570 (base 15579 + curing agent 95570), Hempel 12430 Reddish grey, 5 ltr.
Content 5 Liter
Hempel's 174DE / 1K-PUR-zinc dust-GB, Hempel 19840 = metallic grey, 0,75 Ltr.
Hempel's 174DE / 1K-PUR-zinc dust-GB, Hempel...
HEMPEL’S 174DE is a one-component, moisture-cured polyurethane zinc primer, which contains micaceous iron ore (mio), too. 174DE has got excellent adhesion properties.
Content 0.75 Liter
Hempel's Thinner 08080, transparent, 20 Ltr.
Hempel's Thinner 08080, transparent, 20 Ltr.
Description: HEMPEL PAINT is produced and supplied in such a way that thinning is normally not necessary provided the paint is properly mixed/stirred. However, if the paint is to be applied in a low film thickness (for instance as a ""sealer coat"") or if the paint has become too thick, e.g. in cold weather, the HEMPEL THINNER(s) indicated on the product data sheet may be added to obtain a consistency most suitable for application. As a general rule, thinning should be kept at a minimum as the quality of the paint work will suffer from too liberal thinning. However, if application is to take place at high temperatures (air and/or steel), thinning may even beyond the limits mentioned on the data sheets exceptionally be necessary in order to avoid dry-spray and poor film formation. HEMPEL'S THINNERS are blended to give the best results with regard to brush ability, spray properties, etc. In some cases ordinary solvents may substitute. As such products are beyond our control, we disclaim any responsibility for the results. In each case the respective product data sheet and - when available - the APPLICATION INSTRUCTIONS should be consulted. As regards the use of THINNERS for cleaning of tools, see REMARKS overleaf. Recomended use: 08080 (25°C/77°F) HEMPAQUICK qualities. HEMPATEX qualities. HEMPATHANE topcoats and enamels. HEMPEL'S ANTIFOULINGS, GLOBIC and DYNAMIC, OCEANIC and OLYMPIC.
Content 20 Liter
Hempel's Thinner 08230, transparent, 5 Ltr.
Hempel's Thinner 08230, transparent, 5 Ltr.
Description: HEMPEL PAINT is produced and supplied in such a way that thinning is normally not necessary provided the paint is properly mixed/stirred. However, if the paint is to be applied in a low film thickness (for instance as a ""sealer coat"") or if the paint has become too thick, e.g. in cold weather, the HEMPEL THINNER(s) indicated on the product data sheet may be added to obtain a consistency most suitable for application. As a general rule, thinning should be kept at a minimum as the quality of the paint work will suffer from too liberal thinning. However, if application is to take place at high temperatures (air and/or steel), thinning may even beyond the limits mentioned on the data sheets exceptionally be necessary in order to avoid dry-spray and poor film formation. HEMPEL'S THINNERS are blended to give the best results with regard to brush ability, spray properties, etc. In some cases ordinary solvents may substitute. As such products are beyond our control, we disclaim any responsibility for the results. In each case the respective product data sheet and - when available - the APPLICATION INSTRUCTIONS should be consulted. As regards the use of THINNERS for cleaning of tools, see REMARKS overleaf. Recomended use: 08080 (25°C/77°F) HEMPAQUICK qualities. HEMPATEX qualities. HEMPATHANE topcoats and enamels. HEMPEL'S ANTIFOULINGS, GLOBIC and DYNAMIC, OCEANIC and OLYMPIC.
Content 5 Liter
Hempel's Thinner 08230, transparent, 20 Ltr.
Hempel's Thinner 08230, transparent, 20 Ltr.
Description: HEMPEL PAINT is produced and supplied in such a way that thinning is normally not necessary provided the paint is properly mixed/stirred. However, if the paint is to be applied in a low film thickness (for instance as a ""sealer coat"") or if the paint has become too thick, e.g. in cold weather, the HEMPEL THINNER(s) indicated on the product data sheet may be added to obtain a consistency most suitable for application. As a general rule, thinning should be kept at a minimum as the quality of the paint work will suffer from too liberal thinning. However, if application is to take place at high temperatures (air and/or steel), thinning may even beyond the limits mentioned on the data sheets exceptionally be necessary in order to avoid dry-spray and poor film formation. HEMPEL'S THINNERS are blended to give the best results with regard to brush ability, spray properties, etc. In some cases ordinary solvents may substitute. As such products are beyond our control, we disclaim any responsibility for the results. In each case the respective product data sheet and - when available - the APPLICATION INSTRUCTIONS should be consulted. As regards the use of THINNERS for cleaning of tools, see REMARKS overleaf. Recomended use: 08080 (25°C/77°F) HEMPAQUICK qualities. HEMPATEX qualities. HEMPATHANE topcoats and enamels. HEMPEL'S ANTIFOULINGS, GLOBIC and DYNAMIC, OCEANIC and OLYMPIC.
Content 20 Liter
Hempel's Thinner 08450, transparent, 5 Ltr.
Hempel's Thinner 08450, transparent, 5 Ltr.
HEMPEL PAINT is produced and supplied in such a way that thinning is normally not necessary provided the paint is properly mixed/stirred.
Content 5 Liter
Hempel's Thinner 08450, transparent, 20 Ltr.
Hempel's Thinner 08450, transparent, 20 Ltr.
Description: HEMPEL PAINT is produced and supplied in such a way that thinning is normally not necessary provided the paint is properly mixed/stirred. However, if the paint is to be applied in a low film thickness (for instance as a ""sealer coat"") or if the paint has become too thick, e.g. in cold weather, the HEMPEL THINNER(s) indicated on the product data sheet may be added to obtain a consistency most suitable for application. As a general rule, thinning should be kept at a minimum as the quality of the paint work will suffer from too liberal thinning. However, if application is to take place at high temperatures (air and/or steel), thinning may even beyond the limits mentioned on the data sheets exceptionally be necessary in order to avoid dry-spray and poor film formation. HEMPEL'S THINNERS are blended to give the best results with regard to brush ability, spray properties, etc. In some cases ordinary solvents may substitute. As such products are beyond our control, we disclaim any responsibility for the results. In each case the respective product data sheet and - when available - the APPLICATION INSTRUCTIONS should be consulted. As regards the use of THINNERS for cleaning of tools, see REMARKS overleaf. Recomended use: 08080 (25°C/77°F) HEMPAQUICK qualities. HEMPATEX qualities. HEMPATHANE topcoats and enamels. HEMPEL'S ANTIFOULINGS, GLOBIC and DYNAMIC, OCEANIC and OLYMPIC.
Content 20 Liter
Hempel's Zinc Primer 16490, Hempel 19840 = metallic grey, 0,5 Ltr.
Hempel's Zinc Primer 16490, Hempel 19840 =...
HEMPEL'S ZINC PRIMER 16490 is a one-component, high molecular weight, quick drying, phenoxy coating with a high content of zinc.
Content 0.5 Liter
Hempadur EM 35740, Hempel 12170, 2,5 Ltr.
Hempadur EM 35740, Hempel 12170, 2,5 Ltr.
Description:_x000D_ HEMPADUR EM 35740 is a two-component, ultra high solids and very low VOC epoxy coating. It has good self priming properties and is suited for application even under humid conditions and on marginally prepared surfaces. Treated areas, e.g. ballast tanks, can quickly be re-immersed and put back in service. Time to ballast: 8 hours (20°C/68°F)._x000D_ _x000D_ Recommended use:_x000D_ For smaller difficult access areas where climate control and surface preparation is difficult. It is especially recommended for spots and small area onboard maintenance and repair in e.g. water ballast tank. HEMPADUR EM 35740 can be used on moist surfaces, under conditions of 100% relative humidity. It is mainly intended for brush application.
Content 2.5 Liter
Hempathane Topcoat 55214 (Base 55218 + Curing Agent 95370), Hempel 11150 = RAL 7035, 20 Ltr.
Hempathane Topcoat 55214 (Base 55218 + Curing...
Description: HEMPATHANE TOPCOAT 55214 is a two-component glossy acrylic polyurethane coating with good gloss and colour retention. Recommended use: As a finishing coat for protection of structural steel in severely corrosive atmospheric environment, where light-fastness and gloss retention are required. Minimum temperature for curing is -10°C/14°F.
Content 20 Liter
Hempel's 174DE / 1K-PUR-zinc dust-GB, Hempel 19840 = metallic grey, 10 Ltr.
Hempel's 174DE / 1K-PUR-zinc dust-GB, Hempel...
Description: HEMPEL’S 174DE is a one-component, moisture-cured polyurethane zinc primer, which contains micaceous iron ore (mio), too. 174DE has got excellent adhesion properties. Recommended use: As long-term primer on steel for epoxy and polyurethane coating systems in severely corrosive environments.
Content 10 Liter
2 From 6
Last viewed wind turbine spare parts and repair material