En stock
Pour obtenir plus d'informations sur les produits, veuillez vous connecter ou demander le produit via le bouton ci-dessous | S'enregistrer ici...
Commande minimum: 2 Kit
AMPREG 30 R/H STANDARD 1.26KG kit. This is the follow-up material for: AMPREG 21 resin including standard hardener in 1.33 kg set
Disponible en stock
- Article n°: WS00900474
AMPREG 30 R/H STANDARD 1.26KG Pack. This is the follow-up material for: AMPREG 21 resin...plus
Informations sur le produit "AMPREG 30 R/H STANDARD 1.26KG kit"
AMPREG 30 R/H STANDARD 1.26KG Pack. This is the follow-up material for: AMPREG 21 resin including standard hardener in 1.33 kg set
LOW VISCOSITY EPOXY WET LAMINATING SYSTEM
Same 100:26 resin to hardener mix ratio by weight across range of hardener speeds Low initial mixed viscosity & good cure progression from ambient only cures Tough resin matrix giving good laminate mechanical properties DNV-GL & Lloyds Register Certified formats available Low Toxicity Hardener Formulations Formulated with Gurit LRT (Light Reflective Technology) as standard
LOW VISCOSITY EPOXY WET LAMINATING SYSTEM
- Improved Hazard Labelling
- CMR & SVHC** Free
- Reduced Environmental Hazards
Ampreg™ 3X Series replaces Gurit`s legacy range of wet laminating systems for the manufacture of large composite structures in the marine, wind and construction industries.
The comprehensive 3X Series portfolio comprises of a single range of low toxicity, blend-able Ampreg 30 hardeners that can be used in conjunction with the following resins:
- Ampreg 30 Low viscosity Resin: replaces Ampreg 21
- Ampreg 31 Drainage resistance Resin: replaces Ampreg 22
- Ampreg 36 Premium Performance Resin: replaces Ampreg 26
Additional ancillary products including Thixotropic Pregel Resin and High Tg hardeners are also available.
Safety Data Sheet Ampreg 30 Resin_EN
Safety Data Sheet Ampreg 3X Standard Hardener_EN
Liens supplémentaires vers "AMPREG 30 R/H STANDARD 1.26KG kit"
Lire, écr. et débatt. des analyses…plus
Évaluations de clients pour "AMPREG 30 R/H STANDARD 1.26KG kit"
Écrire une évaluation
Les évaluations sont publiées après vérification.
En stock
En stock
En stock
En stock
En stock
En stock
En stock
En stock
En stock
En stock
En stock
En stock
En stock
En stock
En stock
En stock
En stock
En stock
En stock
En stock
En stock
En stock
En stock
En stock
En stock
En stock
En stock
En stock
En stock
En stock
En stock
En stock
En stock
En stock
En stock
En stock
En stock
En stock
En stock
En stock
En stock
En stock
En stock
En stock
En stock
En stock
En stock
En stock
En stock
En stock
En stock
En stock
En stock
En stock
En stock
En stock
Derniers articles consultés pour pièces détachées et produits de réparation pour les turbines éoliennes