- Artikel-Nr.: WS06900026
Intelligent controller for all types of wind turbines - Advanced data collection and storage - Onboard webserver - Possibility of redundant use of the controller - Park communication via RJ45 ETHERNET - Possiblity of data up/download via USB Disk - 1 Ethernet Schnittstelle 10/100 Mbits/s - 2 pc. 230 kBAUD RS232 COM ports - USB V1.1 for data storage The WP4100 controller is part of the WP4x00 control concept, which has been specially designed to control large wind turbines - on- and offshore. The WP4x00 control concept ensures optimal operation, high security, and advanced data collection. The concept typical consists of a power supply/backbone module, a WP4100 controller, a Messraster module as well as an analog/digital I/O module dependent on the specific configuration task. The WP4x00 control concept makes it possible to have redundant solutions. The concept is constructed as a plug and play system with automatic module detection and error reporting. Features The WP4100 controller is the center of the entire WP4x00 concept and is among other things equipped with two 230kBit/s RS232 COM ports for modem connection and for other purposes e.g. UPS. Furthermore, the WP4100 is equipped with 10/100Mbit ETHERNET COM port for park communication as well as backbone connection via WP-Line 110. The WP4100 controller is part of and surveys the ?hard wired? safety chain. The WP4100 controller contains internal maintenance free power back up, so essential data will not be lost in case of a system power failure. WP4100 is based on a high speed CPU. The WP4100 controller contains an advanced OS4000 operation system software, that has the TCP/IP protocol stack, web server, PC compatible file system on USB Disk, plug-and- play identification/configuration of all WP-Line modules, status code system, summation in a 30 year structure, and log system with total log. Possibility of easy up-/download of data/programs via USB Disk. The USB Disk can also be used as storage for extended data collection. Possibility of handling up to 10 simultaneous/independent application programs in the e.g. turbine control, park power management, dump-load control, condition monitoring, camera control, customer adapted communication protocols etc. The WP4100 is based on event based communication, which means that only changed values are transmitted via the network. The WP4100 controller can automatically update the program of the WP-Line modules via the network. OPTION: The WP4100 supports the IEC 61131-3 PLC programming standard.