MAIN PRODUCT FEATURES - Thermally stable up to 130°C / 266°F when fully post-cured - Resistant to... mehr
Produktinformationen "T-PRIME 130-1 RESIN 12.5KG"
MAIN PRODUCT FEATURES - Thermally stable up to 130°C / 266°F when fully post-cured - Resistant to thermal cycling damage - Low initial mixed viscosity for easier infusion; 247 cP at 25°C / 77°F - Long pot-life and gel time; capable of infusing large or complex moulds - Ambient curing and low shrinkage for accurate mould manufacture T-Prime 130-1 is an epoxy tooling system for manufacturing glass or carbon moulds from liquid infusion processes. T-Prime 130-1 is compatible with Gurit?s range of 130°C tooling gelcoat, laminating and repair systems. T-Prime 130-1 is a low shrinkage ambient curing system, which provides a simple way to produce high accuracy moulds. Designed for infusion and cure at ambient temperatures, it should then be mid-cured at 40°C / 104°F for 4 hours to guarantee the strength needed for demoulding. It can then be postcured off the plug to give a material that is thermally stable to 130°C / 266°F. Exceeding this temperature will cause a rapid loss in stiffness and a safety margin is required for the maximum tool operating temperature to prevent distortion or tool damage. T-Prime 130-1 is a further improvement on T-Prime 130 giving improved storage stability and an extended pot-life.
Weiterführende Links zu "T-PRIME 130-1 RESIN 12.5KG"
Zuletzt angesehene Ersatzteile und Reparaturprodukte für Windenergieanlagen