ALEXIT® BladeRep® Pore Filler 6
Charge poreuse à 2 composants sans solvant à base de polyuréthane pour l'étanchéité des surfaces de coulée avant le revêtement avec LEP 9 ou Topcoat 12, particulièrement adaptée au remplissage des cratères de coulée et des défauts des substrats en PRV. Le mastic poreux durci présente une bonne ponçabilité.
Safety Data Sheet (SDS) ALEXIT® BladeRep® Pore Filler 6
Safety Data Sheet (SDS) ALEXIT® BladeRep® Hardener 6
| Mixing ratio* | Empty hardener completely into basic product et mix both thoroughly |
| Pot life | 5 - 10 min at 23 °C |
| Processing | with putty knife |
| Yield | approx. 2.0 m²/set at 100 µm TSD (use as fine filler) |
| Drying time before sanding | Can be sanded manually after 2 hours at 23 °C Machine grindable after 3 hours at 23 °C |
| * Medium or large containers: pour additional information on mixing ratio et yield see technical data sheet |
| Product | Packaging size |
| Basic product: ALEXIT® BladeRep® Pore Filler 6 BR6078 |
20 KG/ 6 KG/ 300 gr |
| Hardener: ALEXIT® BladeRep® Hardener 6 BR60H0 |
6 KG/ 1 KG/ 80 gr |
Safety Data Sheet (SDS) ALEXIT® BladeRep® Pore Filler 6
Safety Data Sheet (SDS) ALEXIT® BladeRep® Hardener 6
ALEXIT BladeRep Pore Filler 6, 7808 Agate Grey, 6 kg
Solvent-free, two-component polyurethane filler designed to seal any surface prior to applying LEP 9 or Topcoat 12. Fills pin holes and minor defects on GRP substrates and cures to an easily sandable surface.