Demander le prix

Mit * gekennzeichnete Felder sind Pflichtfelder.
Seulement pour clients commerciaux

Produits de réparation pour les tours d'éoliennes

Dans cette catégorie, vous trouverez produits de réparation pour tours d'éoliennes.

Si vous ne trouvez pas les produits que vous recherchez, veuillez nous envoyer votre demande et nous les rechercherons pour vous.

En ayant accès à une large gamme de produits de différents fabricants, nous pouvons vous aider à trouver la bonne pièce de rechange et les bons accessoires pour votre éolienne.
Dans cette catégorie, vous trouverez produits de réparation pour tours d'éoliennes . Si vous ne trouvez pas les produits que vous recherchez, veuillez nous envoyer votre demande et nous les... lire plus »
Fermer fenêtre
Produits de réparation pour les tours d'éoliennes
Dans cette catégorie, vous trouverez produits de réparation pour tours d'éoliennes.

Si vous ne trouvez pas les produits que vous recherchez, veuillez nous envoyer votre demande et nous les rechercherons pour vous.

En ayant accès à une large gamme de produits de différents fabricants, nous pouvons vous aider à trouver la bonne pièce de rechange et les bons accessoires pour votre éolienne.
Fermer filtres
 
  •  
1 de 4
Aucun résultat trouvé pour le filtre !
Pour plus d'informations sur les produits, veuillez vous connecter ou demander le produit via le bouton ci-dessous | S'enregistrer ici...
Hempel Hempathane HS 55610 (Base 55619 + Curing Agent 97050), Hempel 11150 = RAL 7035, 0,75 Ltr.
Hempel Hempathane HS 55610 (Base 55619 + Curing...
Description: HEMPATHANE HS 55610 is a two-component glossy acrylic polyurethane topcoat, cured with aliphatic isocyanate, with good gloss and colour retention. Contains zinc phosphate. Recommended use: As a VOC-compliant, high-build finishing coat for protection of structural steel in severely corrosive environment. May be specified as a one coat "Direct To Metal" system in environments classified as C2 and C3.
Contenu 0.75 Liter
Commande minimum: 1 pc(s).
En stock
Hempadur EM 35740, Hempel 12170, 2,5 Ltr.
Hempadur EM 35740, Hempel 12170, 2,5 Ltr.
Description:_x000D_ HEMPADUR EM 35740 is a two-component, ultra high solids and very low VOC epoxy coating. It has good self priming properties and is suited for application even under humid conditions and on marginally prepared surfaces. Treated areas, e.g. ballast tanks, can quickly be re-immersed and put back in service. Time to ballast: 8 hours (20°C/68°F)._x000D_ _x000D_ Recommended use:_x000D_ For smaller difficult access areas where climate control and surface preparation is difficult. It is especially recommended for spots and small area onboard maintenance and repair in e.g. water ballast tank. HEMPADUR EM 35740 can be used on moist surfaces, under conditions of 100% relative humidity. It is mainly intended for brush application.
Contenu 2.5 Liter
Commande minimum: 1 pc(s).
Hempathane Topcoat 55213 (Base 55217 + Curing Agent 95370), Hempel 11150 = RAL 7035, 0,75 Ltr.
Hempathane Topcoat 55213 (Base 55217 + Curing...
Description: HEMPATHANE TOPCOAT 55213 is a two-component, semi-flat/semi-gloss acrylic polyurethane coating with good gloss and colour retention. Recommended use: As a finishing coat for protection of stuctural steel in severely corrosive atmospheric environment, where light-fastness and gloss retention are required. Minimum temperature for curing is -10°C/14°F.
Contenu 0.75 Liter
Commande minimum: 6 pc(s).
Hempel's Zinc Primer 16490, Hempel 19840 = metallic grey, 4 Ltr.
Hempel's Zinc Primer 16490, Hempel 19840 =...
Description: HEMPEL'S ZINC PRIMER 16490 is a one-component, high molecular weight, quick drying, phenoxy coating with a high content of zinc. Recommended use: As a protective primer on steel in severely corrosive environment. For repair of GALVOSIL and other zinc rich coatings. For repair of galvanized steel. In compliance with SSPC-Paint 20, type 2, level 3.
Contenu 4 Liter
Commande minimum: 1 pc(s).
Hempel Curing Agent 97050 0,63 LI - FARBLOS 00000
Hempel Curing Agent 97050 0,63 LI - FARBLOS 00000
Hempel Curing Agent 97050 0,63 LI - FARBLOS 00000
Contenu 0.63 Liter
Commande minimum: 3 pc(s).
Hempel Curing agent 97050 2,5 LI COLORLESS
Hempel Curing agent 97050 2,5 LI COLORLESS
Hempel Curing agent 97050 2,5 LI COLORLESS
Contenu 2.5 Liter
Commande minimum: 1 pc(s).
NOUVEAU
Hempel Hempathane HS 5561B (Base 5561P + Hardener 97050), Hempel 11150 = RAL 7035, 20 Ltr.
Hempel Hempathane HS 5561B (Base 5561P +...
Description: HEMPATHANE HS 5561B is a two-component glossy acrylic polyurethane topcoat, cured with aliphatic isocyanate, with good gloss and colour retention. Contains zinc phosphate. Recommended use: As a VOC-compliant, high-build finishing coat for protection of structural steel in severely corrosive environment. May be specified as a one coat "Direct To Metal" system in environments classified as C2 and C3.
Contenu 20 Liter
Commande minimum: 1 pc(s).
Hempel's 174DE / 1K-PUR-zinc dust-GB, Hempel 19840 = metallic grey, 0,75 Ltr.
Hempel's 174DE / 1K-PUR-zinc dust-GB, Hempel...
Description: HEMPEL’S 174DE is a one-component, moisture-cured polyurethane zinc primer, which contains micaceous iron ore (mio), too. 174DE has got excellent adhesion properties. Recommended use: As long-term primer on steel for epoxy and polyurethane coating systems in severely corrosive environments.
Contenu 0.75 Liter
Commande minimum: 6 pc(s).
Hempadur 47140 (Base 47149 + Curing Agent 98140), Hempel 20450 = RAL 9001, 0,75 Ltr.
Hempadur 47140 (Base 47149 + Curing Agent...
Description: HEMPADUR 47140 is a two-component polyamide adducts cured, high build epoxy paint which combines a relatively high volume solids content with a short drying time. VOC compliant. Recommended use: As a primer in mild to medium atmospheric environments.As an intermediate or finishing coat in epoxy systems in medium to severely corrosive atmospheric environment. As a finishing coat where the usual outdoor cosmetic appearance of epoxy paints is acceptable. May be used directly on cured zinc silicate (GALVOSIL products) or spray-metallised surfaces to minimise popping.
Contenu 0.75 Liter
Commande minimum: 6 pc(s).
Hempel's Thinner 08080, transparent, 5 Ltr.
Hempel's Thinner 08080, transparent, 5 Ltr.
Description: HEMPEL PAINT is produced and supplied in such a way that thinning is normally not necessary provided the paint is properly mixed/stirred. However, if the paint is to be applied in a low film thickness (for instance as a ""sealer coat"") or if the paint has become too thick, e.g. in cold weather, the HEMPEL THINNER(s) indicated on the product data sheet may be added to obtain a consistency most suitable for application. As a general rule, thinning should be kept at a minimum as the quality of the paint work will suffer from too liberal thinning. However, if application is to take place at high temperatures (air and/or steel), thinning may even beyond the limits mentioned on the data sheets exceptionally be necessary in order to avoid dry-spray and poor film formation. HEMPEL'S THINNERS are blended to give the best results with regard to brush ability, spray properties, etc. In some cases ordinary solvents may substitute. As such products are beyond our control, we disclaim any responsibility for the results. In each case the respective product data sheet and - when available - the APPLICATION INSTRUCTIONS should be consulted. As regards the use of THINNERS for cleaning of tools, see REMARKS overleaf. Recomended use: 08080 (25°C/77°F) HEMPAQUICK qualities. HEMPATEX qualities. HEMPATHANE topcoats and enamels. HEMPEL'S ANTIFOULINGS, GLOBIC and DYNAMIC, OCEANIC and OLYMPIC.
Contenu 5 Liter
Commande minimum: 1 pc(s).
Hempel's Thinner 08080, transparent, 20 Ltr.
Hempel's Thinner 08080, transparent, 20 Ltr.
Description: HEMPEL PAINT is produced and supplied in such a way that thinning is normally not necessary provided the paint is properly mixed/stirred. However, if the paint is to be applied in a low film thickness (for instance as a ""sealer coat"") or if the paint has become too thick, e.g. in cold weather, the HEMPEL THINNER(s) indicated on the product data sheet may be added to obtain a consistency most suitable for application. As a general rule, thinning should be kept at a minimum as the quality of the paint work will suffer from too liberal thinning. However, if application is to take place at high temperatures (air and/or steel), thinning may even beyond the limits mentioned on the data sheets exceptionally be necessary in order to avoid dry-spray and poor film formation. HEMPEL'S THINNERS are blended to give the best results with regard to brush ability, spray properties, etc. In some cases ordinary solvents may substitute. As such products are beyond our control, we disclaim any responsibility for the results. In each case the respective product data sheet and - when available - the APPLICATION INSTRUCTIONS should be consulted. As regards the use of THINNERS for cleaning of tools, see REMARKS overleaf. Recomended use: 08080 (25°C/77°F) HEMPAQUICK qualities. HEMPATEX qualities. HEMPATHANE topcoats and enamels. HEMPEL'S ANTIFOULINGS, GLOBIC and DYNAMIC, OCEANIC and OLYMPIC.
Contenu 20 Liter
Commande minimum: 1 pc(s).
Hempel's Thinner 08230, transparent, 5 Ltr.
Hempel's Thinner 08230, transparent, 5 Ltr.
Description: HEMPEL PAINT is produced and supplied in such a way that thinning is normally not necessary provided the paint is properly mixed/stirred. However, if the paint is to be applied in a low film thickness (for instance as a ""sealer coat"") or if the paint has become too thick, e.g. in cold weather, the HEMPEL THINNER(s) indicated on the product data sheet may be added to obtain a consistency most suitable for application. As a general rule, thinning should be kept at a minimum as the quality of the paint work will suffer from too liberal thinning. However, if application is to take place at high temperatures (air and/or steel), thinning may even beyond the limits mentioned on the data sheets exceptionally be necessary in order to avoid dry-spray and poor film formation. HEMPEL'S THINNERS are blended to give the best results with regard to brush ability, spray properties, etc. In some cases ordinary solvents may substitute. As such products are beyond our control, we disclaim any responsibility for the results. In each case the respective product data sheet and - when available - the APPLICATION INSTRUCTIONS should be consulted. As regards the use of THINNERS for cleaning of tools, see REMARKS overleaf. Recomended use: 08080 (25°C/77°F) HEMPAQUICK qualities. HEMPATEX qualities. HEMPATHANE topcoats and enamels. HEMPEL'S ANTIFOULINGS, GLOBIC and DYNAMIC, OCEANIC and OLYMPIC.
Contenu 5 Liter
Commande minimum: 2 pc(s).
1 de 4
Derniers articles consultés pour pièces détachées et produits de réparation pour les turbines éoliennes