SikaCor EG1 (AB) DB702ca 30kg

SikaCor® EG-1 is a 2-component, micaceous iron oxide intermediate coating based on epoxy resin. Low solvent content according to the guideline of the Paint Industry Association for corrosion protection and coating materials (VdL-RL 04).

APPLICATION
SikaCor® EG-1 is intended for use by professional applicators only.
SikaCor® EG-1 is used as a mechanically resistant intermediate coating for atmospherically loaded surfaces of steel, hot-dip galvanized steel, spray galvanized steel, stainless steel or aluminum. SikaCor® EG-1 in combination with 2-component primer and top coats results in a mechanically resistant, water and chemical resistant coating system for long-lasting corrosion protection up to C5 high, according to DIN EN ISO 12944-2.

PRODUCT FEATURES/ ADVANTAGES

• Can be used directly on hot-dip and spray-galvanized steel as well as stainless steel and aluminum
• Coating thicknesses up to 120 µm per pass
• Very good corrosion protection properties
• Tough and hard, but not brittle
• Largely insensitive to impact and shock