Mita-Teknik Zylindrischer Näherungssensor M18/8MM PNP geschätzt, 7621800
The inductive switch is used in connection the IC/ WP-Controllers. Suitable for rotor and generator RPM measurements. Easy cable connection. Easy mounting at generator, bearings, gear box etc. 8-16 mm sensing distance depending on the type The inductive sensor is used for sensing RPM of the wind turbine rotor and generator. This sensor has a rated operating distance of 8 mm at shielded types and 16 mm at non-shielded types. This means that information of e.g the rotation speed is given to the controller within a range of 0 to 6.4 mm at shielded type and 0 to 12.8 mm at non shielded types. Output: PNP open collector or NPN open collector. Protection:Short-circuitand reverse polarity. LED-indication for output on.