No results were found for the filter!
For more information about products, please log in or request the product via the button below | Register here...
On stock
Mixing nozzles for RELEST Wind Putty...
Mixing nozzles for RELEST Wind Putty Porefiller, 400 ml cartridge (1 bag = 10 nozzles)
Content 10 Stück
On stock
Vortex Generator 16 02010-24469 0,5 mm 1.4301...
Vortex generator 26 02010-24469 made of 0.5 mm 1.4301 powdered RAL 7035 for Nordex, NR 34.0/ NR 37.5 / NR 45-3
On stock
BladeRep Profile Filler 7B blue, 400 ml, BR7B53
Solvent-free 2-component cartridge filler on polyurethane basis.
Content 400 Gramm
On stock
Bergolin Steodur PUR Putty S 6D979, RAL 7038,...
Bergolin Steodur PUR Putty S 6D979 is a-pigmented, elastic, solvent-free, non-fade, 2-component liquid plastic for rotor blades of wind turbines.
Content 0.515 Kilogramm
On stock
3M Polyester Tape 8991, Blue, 51 mm x 66 m,...
Thin and conformable, our 3M Polyester Tape 8991 is a general purpose tape that excels in high temperature masking operations such as powder coat painting. Coated with a silicone adhesive, this tape bonds to a variety of difficult surfaces. It is chemical resistant and performs under a wide range of temperatures and environments.
On stock
Bergolin LEP 6D2900 2-component edge protection...
Bergolin LEP 6D2900 2-component edge protection 0.504 kg cartridge RAL7038
Content 0.524 Kilogramm
On stock
AMPREG 31 R/H FAST 4.66 KG kit
AMPREG 31 R/H FAST 4.66 KG Pack
EPOXY WET LAMINATING SYSTEM
EPOXY WET LAMINATING SYSTEM
- Same 100:26 resin to hardener mix ratio by weight across range of hardener speeds
- Viscosity optimised for good fabric wet-out and drainage resistance
- Good cure progression from ambient only cures
- Tough resin matrix giving good laminate mechanical properties
- DNV-GL Certified formats available & Lloyds Register Certification in progress
- Low Toxicity Hardener Formulations
- Improved Hazard Labelling
- CMR & SVHC** Free
- Reduced Environmental Hazards
- Formulated with Gurit LRT (Light Reflective Technology) as standard
Safety data sheet Ampreg 31 Resin_EN
Safety data sheet Ampreg 3X Fast Hardener_EN
Content 4.66 Kilogramm
On stock
Mixing nozzles for Bergolin Steodur PUR...
Mixing nozzles for Bergolin Steodur PUR Spachtel S 6D979, 0,515 kg cartridge (1 bag= 10 nozzles)
Content 10 Stück
On stock
Mixing nozzles for Bergolin LEP 6D1100, 0,542...
Mixing nozzles for Bergolin LEP 6D1100, 0,542 kg cartridge (1 bag = 10 nozzles)
Content 10 Stück
On stock
Mixing nozzles for Bergolin Spezial MW1 6D1700,...
Mixing nozzles for Bergolin Spezial MW1 6D1700, 0,524 kg cartridge (1 bag = 10 nozzles)
Content 10 Stück
On stock
Mixing nozzle for Bergolin LEP 6D2900 2K edge...
Mixing nozzle for Bergolin LEP 6D2900 2K edge protection 0.504 kg cartridges (1 bag = 10 mixing nozzles)
Content 10 Stück
On stock
Mixing nozzles for Bergolin Special MW1 6D1700,...
Mixing nozzles for Bergolin Special MW1 6D1700, RAL 7038, 0.524 kg cartridge
Content 10 Stück
Last viewed wind turbine spare parts and repair material