ALEXIT® BladeRep® Topcoat 12
ALEXIT® BladeRep Topcoat 12 es una capa de acabado de 2 componentes resistente al exterior a base de poliuretano para la protección contra la erosión por la lluvia y las partículas como el cuarzo y el polvo. Además, ALEXIT® BladeRep Topcoat 12 tiene una alta flexibilidad y muy buena resistencia química.
Especialmente desarrollado para el recubrimiento de cuchillas donde se requiere un producto superior con resistencia química, a los rayos UV y a la abrasión, así como resistencia mecánica. Esta capa superior de poliuretano de dos componentes cumple o supera las normas de los fabricantes de equipos originales y proporciona a los contratistas el producto ideal para la reparación de cuchillas.
Este topcoat bicomponente de alta calidad a base de poliuretano fue desarrollado para el recubrimiento de palas. Gracias a su resistencia mecánica y química, cumple los requisitos habituales de la industria eólica.
| Colours* | RAL 2009 traffic orange, RAL 7035 light grey, RAL 9010 pure white |
| Mixing ratio** | Punch through the lid, empty the entire hardener quantity into master lacquer, add 7% thinner (2 lids) and mix everything thoroughly |
| Pot life | approx. 120 min at 23° C |
| Processing | with foam roller |
| Yield | approx. 2.5 m²/set at 150 µm TSD |
| 2-layer application | 100 to 125 µm per layer at 23° C flash-off time between the layers: 60 min at 23° C |
| Drying time | 3.5 h at 23° C |
| * otros colours are available on request ** medium or large containers: para additional information on mixing ratio and yield, see technical data sheet |
| Product | Packaging sizes |
| Basic product: ALEXIT® BladeRep® Topcoat 12 To be used with: |
24 KG/ 12 KG/ 1 KG / 800 gr |
| Hardener: ALEXIT® BladeRep® Hardener 12 |
6 KG/ 3 KG / 220 gr |
| Thinner: ALEXIT® BladeRep® Thinner 12 Medium ALEXIT® BladeRep® Thinner 12 Fast |
10 KG / 1 KG |
Safety Data Sheet ALEXIT® BladeRep® Topcoat 12
Safety Data Sheet ALEXIT® BladeRep® Hardener 12
Safety Data Sheet ALEXIT® BladeRep® Thinner 12 Medium
Safety Data Sheet ALEXIT® BladeRep® Thinner 12 Fast
En stock
ALEXIT BladeRep Topcoat 12, RAL 7035 Light Grey, 1 kg Kit
2-component topcoat on a polyurethane basis to protect against erosion by rain and particles such as quartz and dust
En stock
ALEXIT BladeRep Topcoat 12, RAL 7035 Light Grey, 12 kg
ALEXIT® BladeRep Topcoat 12 is an exterior resistant 2-component topcoat based on polyurethane for final coating of rotor blades of wind turbines.
En stock
ALEXIT BladeRep Topcoat 12, RAL 3020 Traffic Red, 12 kg
ALEXIT® BladeRep Topcoat 12 is an exterior resistant 2-component topcoat based on polyurethane for final coating of rotor blades of wind turbines.
ALEXIT BladeRep Topcoat 12, RAL 9010 Pure White, 800 gr
Designed specifically for coating blades where a superior product with chemical, UV, abrasion and mechanical resistance is required.
ALEXIT BladeRep Topcoat 12, RAL 9003 Signal White, 12 kg
Designed specifically for coating blades where a superior product with chemical, UV, abrasion and mechanical resistance is required. This two-component polyurethane topcoat meets or exceeds OEM standards and provides applicators with the ideal product for blade repairs.
ALEXIT BladeRep Topcoat 12, RAL 9018 Papyrus White, 800 gr
Designed specifically for coating blades where a superior product with chemical, UV, abrasion and mechanical resistance is required. This two-component polyurethane topcoat meets or exceeds OEM standards and provides applicators with the ideal product for blade repairs.
ALEXIT BladeRep Topcoat 12, RAL 9010 Pure White, 1 kg Kit
Designed specifically for coating blades where a superior product with chemical, UV, abrasion and mechanical resistance is required.
ALEXIT® BladeRep® ALP 20, 1 kg (Similar to 3020 Traffic Red)
ALEXIT® BladeRep® Topcoat ALP20 is a coating system that is specifically designed to enhance the performance of existing lightning protection systems on wind blades.
ALEXIT BladeRep Thinner 12 Medium, Transparent, 1 kg
ALEXIT BladeRep Thinner 12 Medium, Transparent, 1 kg
ALEXIT BladeRep Topcoat 12, RAL 9004 Signal black, 12 kg
ALEXIT BladeRep Topcoat 12, RAL 9004 Signal black, 12 kg
ALEXIT® BladeRep® ALP 20, 1 kg (Similar to 7035 Light Grey)
ALEXIT® BladeRep® Topcoat ALP20 is a coating system that is specifically designed to enhance the performance of existing lightning protection systems on wind blades.
ALEXIT® BladeRep® Topcoat 14, RAL 2009 Traffic Orange, 4 kg
Designed specifically for coating blades where a superior product with chemical, UV, abrasion and mechanical resistance is required.
ALEXIT BladeRep Topcoat 12, RAL 3020 Traffic Red, 800 gr
ALEXIT® BladeRep Topcoat 12 is an exterior resistant 2-component topcoat based on polyurethane for final coating of rotor blades of wind turbines.
ALEXIT BladeRep Topcoat 12, RAL 9003 Signal White, 1 kg Kit
ALEXIT® BladeRep Topcoat 12 is an externally resistant 2-component topcoat based on polyurethane for protection against erosion by rain and particles such as quartz and dust. In addition, ALEXIT® BladeRep Topcoat 12 has a high flexibility and very good chemical resistance.
ALEXIT® BladeRep® Topcoat 14, RAL 3020 Traffic Red, 0,5 kg Kit
Designed specifically for coating blades where a superior product with chemical, UV, abrasion and mechanical resistance is required.
ALEXIT BladeRep Topcoat 12, RAL 9018 Papyrus White, 1 kg Kit
Designed specifically for coating blades where a superior product with chemical, UV, abrasion and mechanical resistance is required. This two-component polyurethane topcoat meets or exceeds OEM standards and provides applicators with the ideal product for blade repairs.
ALEXIT BladeRep Topcoat 12, RAL 7035 Light Grey, 800 gr
ALEXIT® BladeRep® Topcoat 12 is designed specifically for coating blades where a superior product with chemical, UV, abrasion and mechanical resistance is required. This twocomponent polyurethane topcoat meets or exceeds OEM standards and provides applicators with the ideal product for blade repairs.
ALEXIT BladeRep Topcoat 12, RAL 3020 Traffic Red, 1 kg Kit
Designed specifically for coating blades where a superior product with chemical, UV, abrasion and mechanical resistance is required.
ALEXIT® BladeRep® Topcoat 14, RAL 9010 Pure White, 0,5 kg Kit
Designed specifically for coating blades where a superior product with chemical, UV, abrasion and mechanical resistance is required.
ALEXIT BladeRep Topcoat 12, RAL 2009 Traffic Orange, 12 kg
Designed specifically for coating blades where a superior product with chemical, UV, abrasion and mechanical resistance is required.
ALEXIT BladeRep Topcoat 12, RAL 9016 traffic white, 12 kg
ALEXIT BladeRep Topcoat 12, RAL 9016 traffic white, 12 kg