Productos de reparación para torres de aerogeneradores

HEMPATHANE HS 55610 is a two-component glossy acrylic polyurethane topcoat, cured with aliphatic isocyanate, with good gloss and colour retention. Contains zinc phosphate.

HEMPATHANE TOPCOAT 55213 is a two-component, semi-flat/semi-gloss acrylic polyurethane coating with good gloss and colour retention.

HEMPADUR 47140 is a two-component polyamide adducts cured, high build epoxy paint which combines a relatively high volume solids content with a short drying time. VOC compliant.

Description: HEMPADUR 47140 is a two-component polyamide adducts cured, high build epoxy paint which combines a relatively high volume solids content with a short drying time. VOC compliant. Recommended use: As a primer in mild to medium atmospheric environments.As an intermediate or finishing coat in epoxy systems in medium to severely corrosive atmospheric environment. As a finishing coat where the usual outdoor cosmetic appearance of epoxy paints is acceptable. May be used directly on cured zinc silicate (GALVOSIL products) or spray-metallised surfaces to minimise popping.

Hempadur 4774D is a self-priming, high-build, epoxy coating that provides both abrasion and corrosion resistance.

Description: HEMPATHANE TOPCOAT 55214 is a two-component glossy acrylic polyurethane coating with good gloss and colour retention. Recommended use: As a finishing coat for protection of structural steel in severely corrosive atmospheric environment, where light-fastness and gloss retention are required. Minimum temperature for curing is -10°C/14°F.

Hempel Curing Agent 97050 0,63 LI - FARBLOS 00000

HEMPEL’S 174DE is a one-component, moisture-cured polyurethane zinc primer, which contains micaceous iron ore (mio), too. 174DE has got excellent adhesion properties.

Description: HEMPEL PAINT is produced and supplied in such a way that thinning is normally not necessary provided the paint is properly mixed/stirred. However, if the paint is to be applied in a low film thickness (for instance as a ""sealer coat"") or if the paint has become too thick, e.g. in cold weather, the HEMPEL THINNER(s) indicated on the product data sheet may be added to obtain a consistency most suitable for application. As a general rule, thinning should be kept at a minimum as the quality of the paint work will suffer from too liberal thinning. However, if application is to take place at high temperatures (air and/or steel), thinning may even beyond the limits mentioned on the data sheets exceptionally be necessary in order to avoid dry-spray and poor film formation. HEMPEL'S THINNERS are blended to give the best results with regard to brush ability, spray properties, etc. In some cases ordinary solvents may substitute. As such products are beyond our control, we disclaim any responsibility for the results. In each case the respective product data sheet and - when available - the APPLICATION INSTRUCTIONS should be consulted. As regards the use of THINNERS for cleaning of tools, see REMARKS overleaf. Recomended use: 08080 (25°C/77°F) HEMPAQUICK qualities. HEMPATEX qualities. HEMPATHANE topcoats and enamels. HEMPEL'S ANTIFOULINGS, GLOBIC and DYNAMIC, OCEANIC and OLYMPIC.

Hempathane HS 55610 is a glossy polyurethane topcoat, which is cured with aliphatic isocyanate

Hempadur Mastic 45880 is a polyamide-curing epoxy paint with high solids content. It forms a hard and robust coating, has good wetting properties and cures at low temperature.

HEMPATHANE HS 55610 is a two-component glossy acrylic polyurethane topcoat, cured with aliphatic isocyanate, with good gloss and colour retention. Contains zinc phosphate.