Protección contra la corrosión
Protección contra la corrosión para aerogeneradores
En esta categoría encontrará diversos productos del ámbito de la protección anticorrosiva para aerogeneradores. Elija entre los catálogos de productos de estos fabricantes:
- Catálogo de productos de Hempel
- Catálogo de productos de International Farbenwerke
- Catálogo de productos de Jotun
- Catálogo de productos de Sherwin-Williams Coatings
- Otros fabricantes
Si no encuentra los productos que busca, envíenos su consulta y los investigaremos por usted.
Con el acceso a una amplia gama de productos de diferentes fabricantes, podemos ayudarle a encontrar el recambio y los accesorios adecuados para su aerogenerador.
En stock
Repacor, SW-1000 (AB), RAL 1023 traffic yellow, 380g cartridge incl. mixing nozzle
Revestimiento / masilla de reparación con un 100% de volumen sólido. Revestimiento mecánicamente resistente y resistente a los rayos UV del cartucho.
En stock
SUVO non Nafta Spray 500ml yellow line corrosion protection
SUVO non Nafta Spray 500ml yellow line corrosion protection
En stock
Summer mixing nozzles for Repacor SW-1000 (AB) 380 g cartridge, (1 bag = 10 nozzles)
Summer mixing nozzles for Repacor SW-1000 (AB) 380 g cartridge, (1 bag = 10 nozzles)
En stock
Repacor SW-1000 (AB), RAL 7035 light gray, 380g cartridge incl. mixing nozzle
Revestimiento / masilla de reparación con un 100% de volumen sólido. Revestimiento mecánicamente resistente y resistente a los rayos UV desde el cartucho.
En stock
Hempel Hempathane HS 55610 (Base 55619 + Curing Agent 97050), Hempel 11150 = RAL 7035, 0,75 Ltr.
HEMPATHANE HS 55610 is a two-component glossy acrylic polyurethane topcoat, cured with aliphatic isocyanate, with good gloss and colour retention. Contains zinc phosphate.
En stock
Hempadur 47140 (Base 47149 + Curing Agent 98140), Hempel 20450 = RAL 9001, 0,75 Ltr.
HEMPADUR 47140 is a two-component polyamide adducts cured, high build epoxy paint which combines a relatively high volume solids content with a short drying time. VOC compliant.
En stock
Manual cartridge gun for RepaCor SW-1000 380 g cartridge
Manual cartridge gun for SikaCor SW-1000 RepaCor, 380 g cartridge
En stock
Hempadur 47140 (Base 47149 + Curing Agent 98140), Hempel 11150 = RAL 7035, 0,75 Ltr.
HEMPADUR 47140 is a two-component polyamide adducts cured, high build epoxy paint which combines a relatively high volume solids content with a short drying time. VOC compliant.
En stock
Hempathane Topcoat 55214 (Base 55218 + Curing Agent 95370), Hempel 11150 = RAL 7035, 0,75 Ltr.
Description:
HEMPATHANE TOPCOAT 55214 is a two-component glossy acrylic polyurethane coating with good gloss and colour retention.
Recommended use:
As a finishing coat for protection of structural steel in severely corrosive atmospheric environment, where light-fastness and gloss retention are required. Minimum temperature for curing is -10°C/14°F.
En stock
Hempadur 4774D Colour 20454 RAL 9001 (Hempadur 4774M Base + Hempel's Curing Agent 9874D), 0,9 ltr.
Hempadur 4774D is a self-priming, high-build, epoxy coating that provides both abrasion and corrosion resistance.
En stock
Winter mixing nozzle for RepaCor SW-1000 (AB) 380 g cartridge, (1 bag = 10 nozzles)
Winter mixing nozzle for RepaCor SW-1000 (AB) 380 g cartridge, (1 bag = 10 nozzles)
En stock
Hempel's 174DE / 1K-PUR-zinc dust-GB, Hempel 19840 = metallic grey, 0,75 Ltr.
HEMPEL’S 174DE is a one-component, moisture-cured polyurethane zinc primer, which contains micaceous iron ore (mio), too. 174DE has got excellent adhesion properties.
En stock
En stock
Hempel's Thinner 08080, transparent, 5 Ltr.
Description:
HEMPEL PAINT is produced and supplied in such a way that thinning is normally not necessary provided the paint is properly mixed/stirred. However, if the paint is to be applied in a low film thickness (for instance as a ""sealer coat"") or if the paint has become too thick, e.g. in cold weather, the HEMPEL THINNER(s) indicated on the product data sheet may be added to obtain a consistency most suitable for application. As a general rule, thinning should be kept at a minimum as the quality of the paint work will suffer from too liberal thinning. However, if application is to take place at high temperatures (air and/or steel), thinning may even beyond the limits mentioned on the data sheets exceptionally be necessary in order to avoid dry-spray and poor film formation. HEMPEL'S THINNERS are blended to give the best results with regard to brush ability, spray properties, etc. In some cases ordinary solvents may substitute. As such products are beyond our control, we disclaim any responsibility for the results. In each case the respective product data sheet and - when available - the APPLICATION INSTRUCTIONS should be consulted. As regards the use of THINNERS for cleaning of tools, see REMARKS overleaf.
Recomended use:
08080 (25°C/77°F) HEMPAQUICK qualities. HEMPATEX qualities. HEMPATHANE topcoats and enamels. HEMPEL'S ANTIFOULINGS, GLOBIC and DYNAMIC, OCEANIC and OLYMPIC.
En stock
Hempathane Topcoat 55213 (Base 55217 + Curing Agent 95370), Hempel 10170 = RAL 9010, 0,75 Ltr.
HEMPATHANE TOPCOAT 55213 is a two-component, semi-flat/semi-gloss acrylic polyurethane coating with good gloss and colour retention.
En stock
Hempathane HS 55610 (Base 55619 + curing agent 97050), Hempel 42600 = RAL 6017, 5 Ltr.
HEMPATHANE HS 55610 is a two-component glossy acrylic polyurethane topcoat, cured with aliphatic isocyanate, with good gloss and colour retention. Contains zinc phosphate.
En stock
Hempathane HS 55610 (Base 55619 + curing agent 97050), Hempel 47210 = RAL 6021, 5 Ltr.
HEMPATHANE HS 55610 is a two-component glossy acrylic polyurethane topcoat, cured with aliphatic isocyanate, with good gloss and colour retention. Contains zinc phosphate.
En stock
Hempathane HS 55610 (Base 55619 + curing agent 97050), Hempel 40220 = RAL 6010, 5 Ltr.
HEMPATHANE HS 55610 is a two-component glossy acrylic polyurethane topcoat, cured with aliphatic isocyanate, with good gloss and colour retention. Contains zinc phosphate.
En stock
Replacement battery for battery cartridge gun (2 Ah) for Repacor SW-1000 (AB), 380 g cartridge
Replacement battery for battery cartridge gun (2 Ah) for Repacor SW-1000 (AB), 380 g cartridge
En stock
Replacement battery for battery cartridge gun (1,5 Ah) for Repacor SW-1000 (AB), 380 g cartridge
Replacement battery for battery cartridge gun (1,5 Ah) for Repacor SW-1000 (AB), 380 g cartridge
En stock
Hempadur 15570 (Basis 15579 + Härter 95570), Hempel 12430 Rötlichgrau, 5 Ltr.
Description:
HEMPADUR 47140 is a two-component polyamide adducts cured, high build epoxy paint which combines a relatively high volume solids content with a short drying time. VOC compliant.
Recommended use:
As a primer in mild to medium atmospheric environments.As an intermediate or finishing coat in epoxy systems in medium to severely corrosive atmospheric environment. As a finishing coat where the usual outdoor cosmetic appearance of epoxy paints is acceptable. May be used directly on cured zinc silicate (GALVOSIL products) or spray-metallised surfaces to minimise popping.