To get more information about products, please log in or request the product via the button below | Register here...
Minimum purchase: 5 roll
3M ACF 7303 is an epoxy/acrylate-blend adhesive system filled with 43 micron silver-coated glass beads. It is slightly tacky at room temperature and cures at modest bonding temperature and pressure.
Delivery time upon request
- Item no.: WS00402739
The unbonded film is slightly tacky at room temperature and consists of a thermosetting... more
Product information "3M Anisotropic Conductive Film Adhesive 7303, 2.5 mm x 35 m Roll, 50 Rolls/Box"
The unbonded film is slightly tacky at room temperature and consists of a thermosetting epoxy/acrylate adhesive matrix randomly loaded with conductive particles. These particles allow interconnection of circuit lines through the adhesive thickness, but are spaced far enough apart for the product to be electrically insulating in the plane of the adhesive. Hard conductive particles are preferred for copper traces, as they embed into traces for good electrical performance. 3M ACF 7303 may be used to bond a flexible printed circuit to another flexible printed circuit or to a printed circuit board.
Related links to "3M Anisotropic Conductive Film Adhesive 7303, 2.5 mm x 35 m Roll, 50 Rolls/Box"
Read, write and discuss reviews... more
Customer evaluation for "3M Anisotropic Conductive Film Adhesive 7303, 2.5 mm x 35 m Roll, 50 Rolls/Box"
Write an evaluation
Evaluations will be activated after verification.
Last viewed wind turbine spare parts and repair material