3M Structural Adhesive SA9816

A Two Part Structural Adhesive for Greater Design Flexibility
Formulated for galvanized steel or aluminum hem flange bonding, 3M™ Structural Adhesive SA9816 is excellent for applications involving very high lubricant coating weights with good induction reactivity, which are important factors for fast lock up.

When properly cured during the e coat bake, the adhesive achieves structural bond strength to lubricated steel and aluminum. It is also compatible with dry film lubricants used on aluminum surfaces. It has a very long dwell time (up to 14 days) before e coat bake. Its low activation temperatures minimize panel distortion, and provide excellent off ratio and over bake tolerances. It also can be spot cured.

Since manufacturers can pre set automotive panel assemblies, 3M™ Structural Adhesive SA9816 can eliminate the need for body in white ovens and additional fixturing outside of the hemming cell. This can reduce the potential for panel distortion on aluminum hems.

An Adhesive for Enabling Lightweight Design
As automotive OEMs are using more and more lightweight materials such as aluminum and thin steel panels, the hemming process for hoods, trunks, and doors becomes more complex.  The need for mixed material joints is growing, as well as improved vehicle stiffness and better driving characteristics without sacrificing reliable manufacturing processes.

3M™ Structural Adhesive SA9816 eliminates the expense of pre cure ovens associated with 1K solutions on aluminum parts, and helps significantly reduce quality defects during production. It can be pre cured with induction to prevent parts from moving during transport or during the e coat bath before final bake. This helps minimize aluminum panel distortion af