To get more information about products, please log in or request the product via the button below | Register here...
Minimum purchase: 3 box
Epoxy compounds consisting of EPIKOTE™ Resin MGS BPR20 and EPIKURE™ Curing Agent MGS BPH10
Ready for shipment 10 Workdays
- Item no.: WS3602891
APPLICATION BP10 is a solvent-free epoxy-based bonding paste which was especially developed for... more
Product information "EPIKOTE MGSBP10, 0.486 KG cartridge, 926151, epoxy-based adhesive paste"
APPLICATION
BP10 is a solvent-free epoxy-based bonding paste which was especially developed for fast setting bondings in composites applications and for bondings of composites. Performance on metal surfaces should be thoroughly tested in the individual application.
BP10 has a good degree of cure even at lower ambient temperatures. To achieve full mechanical properties and thermal resistance, post-curing of at least 3h 60°C is recommended. However, good mechanical properties are already developed after initial curing of 24h RT.
Surface Preparation
No special surface preparation is required, but bonding surfaces should be dry and free from grease. If bonding surfaces shall be primed, a liquid mix of laminating resin should be used. Priming with bonding paste is not recommended and should be avoided.
Applying & Curing
Standard packaging of BP10 is a 470ml cartridge including resin and curing agent, which facilitates easy and accurate application. The cartridges are also an ideal solution for repairs of bondings in the production and especially in operational environment.
BP10 is only to be used with the supplied static mixers which provide good mixing and low pressure loss. The tip of the mixing nozzle can be cut for an adaption of the flow rate.
BP10 is a solvent-free epoxy-based bonding paste which was especially developed for fast setting bondings in composites applications and for bondings of composites. Performance on metal surfaces should be thoroughly tested in the individual application.
BP10 has a good degree of cure even at lower ambient temperatures. To achieve full mechanical properties and thermal resistance, post-curing of at least 3h 60°C is recommended. However, good mechanical properties are already developed after initial curing of 24h RT.
Surface Preparation
No special surface preparation is required, but bonding surfaces should be dry and free from grease. If bonding surfaces shall be primed, a liquid mix of laminating resin should be used. Priming with bonding paste is not recommended and should be avoided.
Applying & Curing
Standard packaging of BP10 is a 470ml cartridge including resin and curing agent, which facilitates easy and accurate application. The cartridges are also an ideal solution for repairs of bondings in the production and especially in operational environment.
BP10 is only to be used with the supplied static mixers which provide good mixing and low pressure loss. The tip of the mixing nozzle can be cut for an adaption of the flow rate.
Related links to "EPIKOTE MGSBP10, 0.486 KG cartridge, 926151, epoxy-based adhesive paste"
On stock
Read, write and discuss reviews... more
Customer evaluation for "EPIKOTE MGSBP10, 0.486 KG cartridge, 926151, epoxy-based adhesive paste"
Write an evaluation
Evaluations will be activated after verification.
On stock
On stock
On stock
Last viewed wind turbine spare parts and repair material