Ready for shipment 8 Workdays
- Item no.: WS03601455
SikaCor® EG-1 Plus is a 2-component, economical, micaceous iron oxide intermediate coating based on epoxy resin. Low solvent content according to the guideline of the Paint Industry Association for corrosion protection coating materials (VdL-RL 04).
SikaCor® EG-1 Plus is used as a mechanically resistant primer, intermediate and top coat for atmospherically loaded surfaces of steel, hot-dip galvanized steel, stainless steel or aluminum. On thermal spray galvanizing it can be used as a sealer to close pores and also as a subsequent intermediate coating. SikaCor® EG-1 Plus in combination with 2-K primer and top coats results in a mechanically resistant, water and chemical resistant coating system for long lasting corrosion protection up to C5 very high according to DIN EN ISO 12944-2.
Advantages
- Low material consumption per m²
- Fast drying, short recoating times
- Can be used directly on steel, hot-dip galvanized steel and thermal spray galvanized steel, as well as stainless steel and aluminum
- Very good corrosion protection properties
- Wide range of coating thicknesses from 60 - 160 µm per working cycle
- Suitable as a sealant for thermal spray galvanizing