Scotch-Brite Multi-Finishing Wheel , 152 mm x 50.8 mm x 25.4 mm, 2S FIN

Use Scotch-Brite Multi-Finishing Wheel for cleaning and final finishing on a range of metals such as stainless steel, aluminium, brass and copper. Our multi-finishing wheels are ideal for producing grade 3 or 4 finishes on stainless steel and other metals on curved, contoured, and flat surfaces. The wheels run cool and resist loading, due to an open-web construction. This reduces the risk of part discolouration and warping while extending the life of the wheel. They are available in coarse, medium, and fine grade abrasive. Scotch-Brite Multi-Finishing Wheels use silicon carbide abrasive. Silicon carbide is a synthetic mineral that is very sharp and commonly used for low-pressure applications such as paint preparation. It breaks down faster than aluminium oxide, to produce a superior finish. Scotch-Brite industrial abrasives are unique surface conditioning products with abrasives incorporated into non-woven nylon or synthetic fibres. Combining abrasives with the fibres creates an abrasive system that delivers consistent results for the life of the product. We chose an open-web material that runs cool and is load resistant, which keeps the abrasive minerals cutting at high performance by limiting clogging of the fibres.