ALEXIT® BladeRep® Profile Filler 5

Versatile filling filler for fast and effective repair work on rotor blades. ALEXIT BladeRep Profile Filler 5 has been specially developed for use on GRP substrates. ALEXIT® BladeRep® Profile Filler 5 is a solvent-free two-component polyurethane filler used for filling and lining GRP substrates. This non-porous filler hardens to an easily sandable surface.

ALEXIT® BladeRep® Profile Filler 5 is intended for filling and repairing non-structural defects on rotor blades of wind turbines.

Mixing ratio*	4:1
Pot life	10 minutes
Processing	with spatula
Yield	ca. 0,37 m2/Set bei 500µm TSD
Drying time before sanding	60 minutes at 23°C
* Medium or large containers: see technical data sheet for additional information on mixing ratio and yield

Product	Packaging sizes
Basic product: ALEXIT® BladeRep® Profile Filler 5 BR5F66 To be used with:	20 KG/ 4 KG/ 250 gr
Hardener: ALEXIT® BladeRep® Hardener 5 BR5F66	5 KG/ 1 KG/ 100 gr

Safety Data Sheet ALEXIT® BladeRep® Profile Filler 5
Safety Data Sheet ALEXIT® BladeRep® Hardener 5

Close window

ALEXIT® BladeRep® Profile Filler 5

ALEXIT® BladeRep® Profile Filler 5 is intended for filling and repairing non-structural defects on rotor blades of wind turbines.

Mixing ratio*	4:1
Pot life	10 minutes
Processing	with spatula
Yield	ca. 0,37 m2/Set bei 500µm TSD
Drying time before sanding	60 minutes at 23°C
* Medium or large containers: see technical data sheet for additional information on mixing ratio and yield

Product	Packaging sizes
Basic product: ALEXIT® BladeRep® Profile Filler 5 BR5F66 To be used with:	20 KG/ 4 KG/ 250 gr
Hardener: ALEXIT® BladeRep® Hardener 5 BR5F66	5 KG/ 1 KG/ 100 gr

Safety Data Sheet ALEXIT® BladeRep® Profile Filler 5
Safety Data Sheet ALEXIT® BladeRep® Hardener 5

Filter

No results were found for the filter!

For more information about products, please log in or request the product via the button below | Register here...

On stock

ALEXIT BladeRep Profile Filler 5, 6116 Green, 4 kg

ALEXIT BladeRep Profile Filler 5 is designed to be used for filling and fairing on GRP substrates. Based on in-depth R&D research and valuable market insights, we created a product that combines the advantages of BladeRep Profile Fillers 3 and 6, allowing for an even faster process than before.

Content 4 Kilogramm

Details