TIRAK X502P, D400V/50Hz, Personnel winch

To get more information about products, please log in or request the product via the button below | Register here...

Personnel winch TIRAK X502P, D400V/50Hz, 18 m/min, BAS, HGTF, End + Not End On

Ready for shipment 70 Workdays

Item no.: WS03602318

Rope: Ø8mm Payload: 500kg Driving speed: 18m/min Use: passenger transport Connection: 400V 50Hz... more

Product information "TIRAK X502P, D400V/50Hz, Personnel winch"

Rope: Ø8mm
Payload: 500kg
Driving speed: 18m/min
Use: passenger transport
Connection: 400V 50Hz three-phase current
Supply line: 1m cable with CEE plug
Control: pendant control
HT Cable length: 3m permanently connected

Limit switch open + emergency Limit switch open permanently attached mechanical overload cut-off according to DIN EN1808 In accordance with the assembly and operating instructions of the manufacturer Tractel (e.g. tirak -rope walk-through winch § General safety instructions) and for safety reasons it is pointed out that only ropes approved by the manufacturer and for the application may be used. If this advice is not followed, Tractel will not be liable for any damage or consequential damage resulting from failure to comply with the above instructions and their general safety instructions.

- Complete machine is supplied with a CE declaration.
- Supplied with 1m power supply cable
- Upper limit switch and upper Not End (redundancy according to EN1808:2015) mounted on tirak and hardwired
-CE logo on nameplate

Related links to "TIRAK X502P, D400V/50Hz, Personnel winch"

Read, write and discuss reviews... more

Close menu

Customer evaluation for "TIRAK X502P, D400V/50Hz, Personnel winch"

Write an evaluation

Evaluations will be activated after verification.