Adhesivos 3M

3M Industrial Plastic Adhesive 4475, Clear, 5 oz

3M High Performance Industrial Plastic Adhesive 4693 dries quickly with an open bond time of approximately 20 minutes. Its assembled bonds are proven to be strong while resisting weathering as well as damage from water and the sun. Additionally, it bonds well to plastics, providing long-term adhesion as well as good resistance to cleaning products.

3M Adhesion Promoter 111 is an isopropyl alcohol based adhesion promoter for use in conjunction with 3M VHB Tape. It is a one step solution for cleaning and providing better and faster adhesion on surfaces that are fairly clean.

3M Tape Primer 94 is an adhesion promoter for use in conjunction with 3M VHB Tape that supports adhesion to critical substrates such as PE, PP, ABS, PET/PBT blends, concrete, wood, glass, metal and painted metal surfaces.

3M Adhesion Promoter 4298UV is a versatile liquid primer used for enhancing the adhesion of 3M Acrylic Foam Tapes to LSE substrates common for interior and exterior automotive trim and parts. Fast-drying adhesion promoter works with most LSE plastics including TPO, PP and TPU as well as ABS, EPDM and others. A fluorescent dye has been added so technicians can easily verify coverage.

3M Adhesion Promoter 4298 is a versatile liquid primer used for enhancing the adhesion of 3M Acrylic Foam Tapes to LSE substrates common for interior and exterior automotive trim and parts. Fast-drying adhesion promoter works with most LSE plastics including TPO, PP and TPU as well as ABS, EPDM and others. A fluorescent dye has been added so technicians can easily verify coverage.

3M Scotch-Weld EPX Plunger for Manual Applicator. For use with both 1:1 and 2:1 200mL cartridges.

3M VHB Silane Glass Primer combats moisture resistance on glass from adhesives - READY FOR USE

3M ACF 7303 is an epoxy/acrylate-blend adhesive system filled with 43 micron silver-coated glass beads. It is slightly tacky at room temperature and cures at modest bonding temperature and pressure.

A high performance contact adhesive typically used in aircraft interiors that provides excellent initial adhesion for most rubber, fabric & foam, metal, wood veneer, plastic laminate and other substrates.

3M Scotch-Weld Epoxy Adhesive DP100FR is a flame retardant, non-sag, two-part, rigid epoxy adhesive offering a fast cure and machinability. It is a fast-setting epoxy that cures at room temperature to form a rigid bond. Low viscosity for easy dispensing and leveling. Non-sag formulation ensures adhesive stays where applied.

3M Scotch-Weld PUR Adhesive TE031 features rapid strength build-up and set time, producing strong bonds to a wide variety of plastics without drying or ventilation equipment. This extrudable grade adhesive is applied warm through a 3M Scotch-Weld PUR Adhesive Applicator or through bulk equipment specifically designed for use with PUR adhesives.