SikaCor EG-1 DB 601, 30 kg, epoxy resin-based intermediate coating

SikaCor® EG-1 is a 2-component, micaceous iron oxide intermediate coating based on epoxy resin.
Low solvent content according to the guideline of the Paint Industry Association for corrosion protection and coating materials (VdL-RL 04).

APPLICATION
SikaCor® EG-1 is intended for use by professional applicators only.
SikaCor® EG-1 is used as a mechanically resistant intermediate coating for atmospherically loaded surfaces of steel, hot-dip galvanized steel, spray galvanized steel, stainless steel or aluminum.
SikaCor® EG-1 in combination with 2-component primer and top coats provides a mechanically resistant, water and chemical resistant coating system for long-lasting corrosion protection up to C5 high, according to DIN EN ISO 12944-2.

PRODUCT FEATURES/ ADVANTAGES
Can be used directly on hot-dip and spray-galvanized steel as well as stainless steel and aluminum
Coating thicknesses up to 120 µm per pass
Very good corrosion protection properties
Tough and hard, but not brittle
Largely insensitive to impact and shock