TIRAK X502P, D400V/50Hz, Personnel winch

Rope: Ø8mm
Payload: 500kg
Driving speed: 18m/min
Use: passenger transport
Connection: 400V 50Hz three-phase current
Supply line: 1m cable with CEE plug
Control: pendant control
HT Cable length: 3m permanently connected

Limit switch open + emergency Limit switch open permanently attached mechanical overload cut-off according to DIN EN1808 In accordance with the assembly and operating instructions of the manufacturer Tractel (e.g. tirak -rope walk-through winch § General safety instructions) and for safety reasons it is pointed out that only ropes approved by the manufacturer and for the application may be used. If this advice is not followed, Tractel will not be liable for any damage or consequential damage resulting from failure to comply with the above instructions and their general safety instructions.

- Complete machine is supplied with a CE declaration.
- Supplied with 1m power supply cable
- Upper limit switch and upper Not End (redundancy according to EN1808:2015) mounted on tirak and hardwired
-CE logo on nameplate