SikaCor EG-1 Plus(AB)DB601ca, 15KG

SikaCor® EG-1 Plus is a 2-component, economical, micaceous iron oxide intermediate coating based on epoxy resin. Low solvent content according to the guideline of the German Paint Industry Association for anti-corrosion coating materials (VdL-RL 04).

APPLICATION
SikaCor® EG-1 Plus is intended for use by professional applicators only. SikaCor® EG-1 Plus is used as a mechanically resistant primer, intermediate and top coat for atmospherically exposed surfaces of
steel, hot-dip galvanized steel, stainless steel or aluminum. On thermal spray galvanizing it can be used as a sealer to close pores and also as a subsequent intermediate coating. SikaCor® EG-1 Plus in combination with 2-K primer and top coats results in a mechanically resistant, water and chemical resistant coating system for long lasting corrosion protection up to C5 very high according to DIN EN ISO 12944-2.

PRODUCT FEATURES/ADVANTAGES
? Low material consumption per m²
? Fast drying, short recoating times
? Can be used directly on steel, hot-dip galvanized steel and thermal spray galvanizing,as well as stainless steel and aluminum
? Very good corrosion protection properties
? Wide range of coating thicknesses from 60 - 160 µm per working cycle
Suitable as a sealant for thermal spray galvanizing