No results were found for the filter!
For more information about products, please log in or request the product via the button below | Register here...
On stock
AMPREG 31 R/H FAST 4.66 KG kit
AMPREG 31 R/H FAST 4.66 KG Pack
EPOXY WET LAMINATING SYSTEM
EPOXY WET LAMINATING SYSTEM
- Same 100:26 resin to hardener mix ratio by weight across range of hardener speeds
- Viscosity optimised for good fabric wet-out and drainage resistance
- Good cure progression from ambient only cures
- Tough resin matrix giving good laminate mechanical properties
- DNV-GL Certified formats available & Lloyds Register Certification in progress
- Low Toxicity Hardener Formulations
- Improved Hazard Labelling
- CMR & SVHC** Free
- Reduced Environmental Hazards
- Formulated with Gurit LRT (Light Reflective Technology) as standard
Safety data sheet Ampreg 31 Resin_EN
Safety data sheet Ampreg 3X Fast Hardener_EN
Content 4.66 Kilogramm
On stock
AMPREG 30 R/H SLOW 1.26KG Pack
AMPREG 30 R/H SLOW 1.26KG Pack. This product replaces: AMPREG 21 resin incl. slow hardener in 1.33 kg set
Content 1.26 Kilogramm
On stock
AMPREG 30 R/H STANDARD 4.66KG kit, epoxy resin...
AMPREG 30 R/H STANDARD 4.66KG kit. Epoxy wet lamination system with low viscosity. Follow-up material for AMPREG 21 HARD STD 3,6 KG hardener.
Content 4.66 Kilogramm
On stock
AMPREG 31 R/H STANDARD 4.66 KG kit
AMPREG 31 R/H STANDARD 4.66 KG kit, EPOXY WET LAMINATING SYSTEM (follow-up material for AMPREG 22 R/H STD 4.23KG PACK)
Content 4.66 Kilogramm
On stock
On stock
AMPREG 30 R/H FAST 1.26KG Pack
AMPREG 30 R/H FAST 1.26KG pack. This is the follow-up material for: AMPREG 21 Harz incl. fast hardener 1,33 kg set
Content 1.26 Kilogramm
On stock
AMPREG 30 R/H FAST 4.66KG kit, epoxy resin +...
AMPREG 30 R/H FAST 4.66KG kit. This is the follow-up product for: Ampreg 21 resin including fast hardener in 3.6 kg set
Content 4.66 Kilogramm
On stock
On stock
On stock
AMPREG 30 R/H STANDARD 1.26KG kit
AMPREG 30 R/H STANDARD 1.26KG kit. This is the follow-up material for: AMPREG 21 resin including standard hardener in 1.33 kg set
Content 1.26 Kilogramm
On stock
AMPREG 30 R/H EXTRA-SLOW 1.26KG Pack
Ampreg™ 3X Series replaces Gurit`s legacy range of wet laminating systems for the manufacture of large composite structures in the marine, wind and construction industries.
Content 1.26 Kilogramm
Last viewed wind turbine spare parts and repair material