ALEXIT® BladeRep® Topcoat 12

ALEXIT® BladeRep Topcoat 12 is an externally resistant 2-component topcoat based on polyurethane for protection against erosion by rain and particles such as quartz and dust. In addition, ALEXIT® BladeRep Topcoat 12 has a high flexibility and very good chemical resistance.

Specially developed for blade coating where a superior product with chemical, UV and abrasion resistance as well as mechanical resistance is required. This two-component polyurethane topcoat meets or exceeds OEM standards and provides contractors with the ideal product for blade repair.

This high-quality 2-component topcoat on polyurethane basis was developed for the coating of rotor blades. Due to its mechanical and chemical resistances it meets the common requirements of the wind power industry.

Colours*	RAL 2009 traffic orange, RAL 7035 light grey, RAL 9010 pure white
Mixing ratio**	Punch through the lid, empty the entire hardener quantity into master lacquer, add 7% thinner (2 lids) and mix everything thoroughly
Pot life	approx. 120 min at 23° C
Processing	with foam roller
Yield	approx. 2.5 m²/set at 150 µm TSD
2-layer application	100 to 125 µm per layer at 23° C flash-off time between the layers: 60 min at 23° C
Drying time	3.5 h at 23° C
* other colours are available on request ** medium or large containers: for additional information on mixing ratio and yield, see technical data sheet

Product	Packaging sizes
Basic product: ALEXIT® BladeRep® Topcoat 12 To be used with:	24 KG/ 12 KG/ 1 KG / 800 gr
Hardener: ALEXIT® BladeRep® Hardener 12	6 KG/ 3 KG / 220 gr
Thinner: ALEXIT® BladeRep® Thinner 12 Medium ALEXIT® BladeRep® Thinner 12 Fast	10 KG / 1 KG

Safety Data Sheet ALEXIT® BladeRep® Topcoat 12

Safety Data Sheet ALEXIT® BladeRep® Hardener 12

Safety Data Sheet ALEXIT® BladeRep® Thinner 12 Medium
Safety Data Sheet ALEXIT® BladeRep® Thinner 12 Fast

Close window

ALEXIT® BladeRep® Topcoat 12

Colours*	RAL 2009 traffic orange, RAL 7035 light grey, RAL 9010 pure white
Mixing ratio**	Punch through the lid, empty the entire hardener quantity into master lacquer, add 7% thinner (2 lids) and mix everything thoroughly
Pot life	approx. 120 min at 23° C
Processing	with foam roller
Yield	approx. 2.5 m²/set at 150 µm TSD
2-layer application	100 to 125 µm per layer at 23° C flash-off time between the layers: 60 min at 23° C
Drying time	3.5 h at 23° C
* other colours are available on request ** medium or large containers: for additional information on mixing ratio and yield, see technical data sheet

Product	Packaging sizes
Basic product: ALEXIT® BladeRep® Topcoat 12 To be used with:	24 KG/ 12 KG/ 1 KG / 800 gr
Hardener: ALEXIT® BladeRep® Hardener 12	6 KG/ 3 KG / 220 gr
Thinner: ALEXIT® BladeRep® Thinner 12 Medium ALEXIT® BladeRep® Thinner 12 Fast	10 KG / 1 KG

Filter

2 From 3

No results were found for the filter!

For more information about products, please log in or request the product via the button below | Register here...

ALEXIT BladeRep Topcoat 12, RAL 9018 Papyrus...

Designed specifically for coating blades where a superior product with chemical, UV, abrasion and mechanical resistance is required. This two-component polyurethane topcoat meets or exceeds OEM standards and provides applicators with the ideal product for blade repairs.

Content 1 Kilogramm

Details