ALEXIT® BladeRep® Topcoat 12
ALEXIT® BladeRep Topcoat 12 is an externally resistant 2-component topcoat based on polyurethane for protection against erosion by rain and particles such as quartz and dust. In addition, ALEXIT® BladeRep Topcoat 12 has a high flexibility and very good chemical resistance.
Specially developed for blade coating where a superior product with chemical, UV and abrasion resistance as well as mechanical resistance is required. This two-component polyurethane topcoat meets or exceeds OEM standards and provides contractors with the ideal product for blade repair.
This high-quality 2-component topcoat on polyurethane basis was developed for the coating of rotor blades. Due to its mechanical and chemical resistances it meets the common requirements of the wind power industry.
Colours* | RAL 2009 traffic orange, RAL 7035 light grey, RAL 9010 pure white |
Mixing ratio** | Punch through the lid, empty the entire hardener quantity into master lacquer, add 7% thinner (2 lids) and mix everything thoroughly |
Pot life | approx. 120 min at 23° C |
Processing | with foam roller |
Yield | approx. 2.5 m²/set at 150 µm TSD |
2-layer application | 100 to 125 µm per layer at 23° C flash-off time between the layers: 60 min at 23° C |
Drying time | 3.5 h at 23° C |
* other colours are available on request ** medium or large containers: for additional information on mixing ratio and yield, see technical data sheet | |
Product | Packaging sizes |
Basic product: ALEXIT® BladeRep® Topcoat 12
To be used with: | 24 KG/ 12 KG/ 1 KG / 800 gr |
Hardener: ALEXIT® BladeRep® Hardener 12 | 6 KG/ 3 KG / 220 gr |
Thinner: ALEXIT® BladeRep® Thinner 12 Medium ALEXIT® BladeRep® Thinner 12 Fast | 10 KG / 1 KG |
Safety Data Sheet ALEXIT® BladeRep® Topcoat 12
Safety Data Sheet ALEXIT® BladeRep® Hardener 12
Safety Data Sheet ALEXIT® BladeRep® Thinner 12 Medium
Safety Data Sheet ALEXIT® BladeRep® Thinner 12 Fast